sbuild (Debian sbuild) 0.89.3+deb13u1 (16 August 2025) on +===================================================================================+ | ruby-tty-reader 0.9.0-2+rebuild1766614932 (amd64) Wed, 24 Dec 2025 22:22:13 +0000 | +===================================================================================+ Package: ruby-tty-reader Version: 0.9.0-2+rebuild1766614932 Source Version: 0.9.0-2+rebuild1766614932 Distribution: unstable Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: binary I: No tarballs found in /home/admin/.cache/sbuild I: Creating chroot on-demand by running: mmdebstrap --variant=buildd --arch=amd64 --skip=output/mknod --format=tar unstable - I: Unpacking tarball from STDIN to /tmp/tmp.sbuild.mIhu8HQOZ6... I: automatically chosen mode: unshare I: chroot architecture amd64 is equal to the host's architecture I: finding correct signed-by value... I: using /tmp/mmdebstrap.EZEBhANzyq as tempdir I: skipping output/mknod as requested for ./dev/console I: skipping output/mknod as requested for ./dev/full I: skipping output/mknod as requested for ./dev/null I: skipping output/mknod as requested for ./dev/ptmx I: skipping output/mknod as requested for ./dev/random I: skipping output/mknod as requested for ./dev/tty I: skipping output/mknod as requested for ./dev/urandom I: skipping output/mknod as requested for ./dev/zero I: running apt-get update... I: downloading packages with apt... I: extracting archives... I: installing essential packages... I: installing remaining packages inside the chroot... I: cleaning package lists and apt cache... I: creating tarball... I: done I: removing tempdir /tmp/mmdebstrap.EZEBhANzyq... I: success in 12.1247 seconds I: The chroot directory at /tmp/tmp.sbuild.mIhu8HQOZ6 will be removed at the end of the build I: To avoid creating a new chroot from scratch every time, either: I: - place a chroot tarball at /home/admin/.cache/sbuild/unstable-amd64.tar and update it manually, for example by running: mmdebstrap --variant=buildd --arch=amd64 --skip=output/mknod --format=tar unstable /home/admin/.cache/sbuild/unstable-amd64.tar I: - or let sbuild take care of this via the setting UNSHARE_MMDEBSTRAP_KEEP_TARBALL by adding '$unshare_mmdebstrap_keep_tarball = 1;' to your ~/.config/sbuild/config.pl. I: - or completely disable this behaviour via the setting UNSHARE_MMDEBSTRAP_AUTO_CREATE by adding '$unshare_mmdebstrap_auto_create = 0;' to your ~/.config/sbuild/config.pl. I: Refer to UNSHARE_MMDEBSTRAP_KEEP_TARBALL in sbuild.conf(5) for more information I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Wed, 24 Dec 2025 22:22:28 +0000 | +------------------------------------------------------------------------------+ Ign:1 file:/mass-rebuild ./ InRelease Get:2 file:/mass-rebuild ./ Release [1617 B] Get:2 file:/mass-rebuild ./ Release [1617 B] Ign:3 file:/mass-rebuild ./ Release.gpg Get:4 file:/mass-rebuild ./ Packages [70.4 kB] Get:5 http://deb.debian.org/debian unstable InRelease [187 kB] Get:6 http://deb.debian.org/debian experimental InRelease [90.7 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 Packages [10.2 MB] Get:8 http://deb.debian.org/debian experimental/main amd64 Packages [432 kB] Get:9 http://incoming.debian.org/debian-buildd buildd-unstable InRelease [48.9 kB] Get:10 http://incoming.debian.org/debian-buildd buildd-unstable/main amd64 Packages [83.3 kB] Fetched 11.1 MB in 1s (8927 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages will be upgraded: libselinux1 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/85.8 kB of archives. After this operation, 1024 B disk space will be freed. Get:1 file:/mass-rebuild ./ libselinux1 3.9-4+rebuild1766544377 [85.8 kB] (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11800 files and directories currently installed.) Preparing to unpack .../libselinux1_3.9-4+rebuild1766544377_amd64.deb ... Unpacking libselinux1:amd64 (3.9-4+rebuild1766544377) over (3.9-4+b1) ... Setting up libselinux1:amd64 (3.9-4+rebuild1766544377) ... Processing triggers for libc-bin (2.42-6) ... +------------------------------------------------------------------------------+ | Fetch source files Wed, 24 Dec 2025 22:22:30 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /home/admin/mass-rebuild/builds/3/ruby-tty-reader/ruby-tty-reader_0.9.0-2+rebuild1766614932.dsc exists in /home/admin/mass-rebuild/builds/3/ruby-tty-reader; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Wed, 24 Dec 2025 22:22:31 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), gem2deb (>= 1), rake, ruby-rspec, ruby-tty-cursor (>= 0.7), ruby-tty-screen (>= 0.8), ruby-wisper (>= 2.0.0), build-essential Filtered Build-Depends: debhelper-compat (= 13), gem2deb (>= 1), rake, ruby-rspec, ruby-tty-cursor (>= 0.7), ruby-tty-screen (>= 0.8), ruby-wisper (>= 2.0.0), build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/reproducible-path/resolver-9COgb9/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ InRelease Get:2 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Release [609 B] Ign:3 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Release.gpg Get:4 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Sources [710 B] Get:5 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Packages [749 B] Fetched 2068 B in 0s (0 B/s) Reading package lists... Ign:1 file:/mass-rebuild ./ InRelease Get:2 file:/mass-rebuild ./ Release [1617 B] Get:2 file:/mass-rebuild ./ Release [1617 B] Ign:3 file:/mass-rebuild ./ Release.gpg Hit:4 http://deb.debian.org/debian experimental InRelease Hit:5 http://incoming.debian.org/debian-buildd buildd-unstable InRelease Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils ca-certificates debhelper dh-autoreconf dh-strip-nondeterminism dwz file gem2deb gem2deb-test-runner gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libffi8 libfile-stripnondeterminism-perl libgmp-dev libgmpxx4ldbl libmagic-mgc libmagic1t64 libpipeline1 libruby libruby3.3 libtool libuchardet0 libunistring5 libxml2-16 libyaml-0-2 m4 man-db openssl po-debconf rake ruby ruby-all-dev ruby-csv ruby-did-you-mean ruby-diff-lcs ruby-minitest ruby-net-telnet ruby-power-assert ruby-rspec ruby-rspec-core ruby-rspec-expectations ruby-rspec-mocks ruby-rspec-support ruby-ruby2-keywords ruby-rubygems ruby-test-unit ruby-tty-cursor ruby-tty-screen ruby-webrick ruby-wisper ruby-xmlrpc ruby3.3 ruby3.3-dev rubygems-integration sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make git-buildpackage pristine-tar gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff gmp-doc libgmp10-doc libmpfr-dev libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl ri ruby-dev bundler Recommended packages: apt-file debian-policy devscripts python3-debian curl | wget | lynx libarchive-cpio-perl ruby-sdbm libltdl-dev libmail-sendmail-perl zip fonts-lato libjs-jquery ruby3.3-doc The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils ca-certificates debhelper dh-autoreconf dh-strip-nondeterminism dwz file gem2deb gem2deb-test-runner gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libffi8 libfile-stripnondeterminism-perl libgmp-dev libgmpxx4ldbl libmagic-mgc libmagic1t64 libpipeline1 libruby libruby3.3 libtool libuchardet0 libunistring5 libxml2-16 libyaml-0-2 m4 man-db openssl po-debconf rake ruby ruby-all-dev ruby-csv ruby-did-you-mean ruby-diff-lcs ruby-minitest ruby-net-telnet ruby-power-assert ruby-rspec ruby-rspec-core ruby-rspec-expectations ruby-rspec-mocks ruby-rspec-support ruby-ruby2-keywords ruby-rubygems ruby-test-unit ruby-tty-cursor ruby-tty-screen ruby-webrick ruby-wisper ruby-xmlrpc ruby3.3 ruby3.3-dev rubygems-integration sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 65 newly installed, 0 to remove and 0 not upgraded. Need to get 23.4 MB of archives. After this operation, 88.2 MB of additional disk space will be used. Get:1 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [912 B] Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 openssl amd64 3.5.4-1 [1496 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 ca-certificates all 20250419 [162 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.2-1 [245 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2 [68.5 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-10 [1194 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41.3-2 [98.9 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-2 [42.1 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.20-2 [325 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-3 [878 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.2-1 [772 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.29 [92.6 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-9 [540 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 21 [12.2 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get:25 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.194-1 [185 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-2 [108 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.1+dfsg-2+b1 [641 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.2-1 [1687 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.29 [943 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 rubygems-integration all 1.19 [5488 B] Get:34 http://deb.debian.org/debian unstable/main amd64 ruby-csv all 3.3.4-1 [42.2 kB] Get:35 http://deb.debian.org/debian unstable/main amd64 ruby-did-you-mean all 1.6.3-2 [20.9 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 ruby-net-telnet all 0.2.0-1 [13.1 kB] Get:37 http://deb.debian.org/debian unstable/main amd64 ruby-ruby2-keywords all 0.0.5-1 [4300 B] Get:38 http://deb.debian.org/debian unstable/main amd64 ruby-webrick all 1.9.1-1 [59.6 kB] Get:39 http://deb.debian.org/debian unstable/main amd64 ruby-xmlrpc all 0.3.3-2 [24.4 kB] Get:40 http://deb.debian.org/debian unstable/main amd64 libffi8 amd64 3.5.2-3 [26.1 kB] Get:41 http://deb.debian.org/debian unstable/main amd64 libyaml-0-2 amd64 0.2.5-2+b1 [53.8 kB] Get:42 http://deb.debian.org/debian unstable/main amd64 libruby3.3 amd64 3.3.8-2 [6301 kB] Get:43 http://deb.debian.org/debian unstable/main amd64 ruby3.3 amd64 3.3.8-2 [834 kB] Get:44 http://deb.debian.org/debian unstable/main amd64 libruby amd64 1:3.3+b1 [5440 B] Get:45 http://deb.debian.org/debian unstable/main amd64 ruby-rubygems all 3.6.7-2 [407 kB] Get:46 http://deb.debian.org/debian unstable/main amd64 ruby amd64 1:3.3+b1 [6560 B] Get:47 http://deb.debian.org/debian unstable/main amd64 rake all 13.2.1-1 [65.2 kB] Get:48 http://deb.debian.org/debian unstable/main amd64 ruby-minitest all 5.26.1-1 [67.3 kB] Get:49 http://deb.debian.org/debian unstable/main amd64 ruby-power-assert all 2.0.5-1 [11.7 kB] Get:50 http://deb.debian.org/debian unstable/main amd64 ruby-test-unit all 3.6.2-1 [79.1 kB] Get:51 http://deb.debian.org/debian unstable/main amd64 gem2deb-test-runner amd64 2.2.6 [18.4 kB] Get:52 http://deb.debian.org/debian unstable/main amd64 libgmpxx4ldbl amd64 2:6.3.0+dfsg-5 [330 kB] Get:53 http://deb.debian.org/debian unstable/main amd64 libgmp-dev amd64 2:6.3.0+dfsg-5 [658 kB] Get:54 http://deb.debian.org/debian unstable/main amd64 ruby3.3-dev amd64 3.3.8-2 [1045 kB] Get:55 http://deb.debian.org/debian unstable/main amd64 ruby-all-dev amd64 1:3.3+b1 [6496 B] Get:56 http://deb.debian.org/debian unstable/main amd64 gem2deb amd64 2.2.6 [48.3 kB] Get:57 http://deb.debian.org/debian unstable/main amd64 ruby-diff-lcs all 1.6.2-1 [29.8 kB] Get:58 http://deb.debian.org/debian unstable/main amd64 ruby-rspec-support all 3.13.0c0e0m0s1-2 [28.5 kB] Get:59 http://deb.debian.org/debian unstable/main amd64 ruby-rspec-core all 3.13.0c0e0m0s1-2 [164 kB] Get:60 http://deb.debian.org/debian unstable/main amd64 ruby-rspec-expectations all 3.13.0c0e0m0s1-2 [90.2 kB] Get:61 http://deb.debian.org/debian unstable/main amd64 ruby-rspec-mocks all 3.13.0c0e0m0s1-2 [81.3 kB] Get:62 http://deb.debian.org/debian unstable/main amd64 ruby-rspec all 3.13.0c0e0m0s1-2 [5184 B] Get:63 http://deb.debian.org/debian unstable/main amd64 ruby-tty-cursor all 0.7.1-2 [8076 B] Get:64 http://deb.debian.org/debian unstable/main amd64 ruby-tty-screen all 0.8.1-2 [8924 B] Get:65 http://deb.debian.org/debian unstable/main amd64 ruby-wisper all 3.0.0-1 [13.3 kB] Preconfiguring packages ... Fetched 23.4 MB in 0s (82.4 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 11799 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package openssl. Preparing to unpack .../01-openssl_3.5.4-1_amd64.deb ... Unpacking openssl (3.5.4-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../02-ca-certificates_20250419_all.deb ... Unpacking ca-certificates (20250419) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../04-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.23.2-1_amd64.deb ... Unpacking gettext-base (0.23.2-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../07-libuchardet0_0.0.8-2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.23.0-10_amd64.deb ... Unpacking groff-base (1.23.0-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../09-bsdextrautils_2.41.3-2_amd64.deb ... Unpacking bsdextrautils (2.41.3-2) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../10-libpipeline1_1.5.8-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-2) ... Selecting previously unselected package man-db. Preparing to unpack .../11-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.20-2_amd64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.18.1-3_all.deb ... Unpacking automake (1:1.18.1-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.23.2-1_all.deb ... Unpacking autopoint (0.23.2-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../17-libdebhelper-perl_13.29_all.deb ... Unpacking libdebhelper-perl (13.29) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.5.4-9_all.deb ... Unpacking libtool (2.5.4-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../23-libelf1t64_0.194-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.194-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.16-2_amd64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../25-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../26-libxml2-16_2.15.1+dfsg-2+b1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.1+dfsg-2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.23.2-1_amd64.deb ... Unpacking gettext (0.23.2-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.29_all.deb ... Unpacking debhelper (13.29) ... Selecting previously unselected package rubygems-integration. Preparing to unpack .../31-rubygems-integration_1.19_all.deb ... Unpacking rubygems-integration (1.19) ... Selecting previously unselected package ruby-csv. Preparing to unpack .../32-ruby-csv_3.3.4-1_all.deb ... Unpacking ruby-csv (3.3.4-1) ... Selecting previously unselected package ruby-did-you-mean. Preparing to unpack .../33-ruby-did-you-mean_1.6.3-2_all.deb ... Unpacking ruby-did-you-mean (1.6.3-2) ... Selecting previously unselected package ruby-net-telnet. Preparing to unpack .../34-ruby-net-telnet_0.2.0-1_all.deb ... Unpacking ruby-net-telnet (0.2.0-1) ... Selecting previously unselected package ruby-ruby2-keywords. Preparing to unpack .../35-ruby-ruby2-keywords_0.0.5-1_all.deb ... Unpacking ruby-ruby2-keywords (0.0.5-1) ... Selecting previously unselected package ruby-webrick. Preparing to unpack .../36-ruby-webrick_1.9.1-1_all.deb ... Unpacking ruby-webrick (1.9.1-1) ... Selecting previously unselected package ruby-xmlrpc. Preparing to unpack .../37-ruby-xmlrpc_0.3.3-2_all.deb ... Unpacking ruby-xmlrpc (0.3.3-2) ... Selecting previously unselected package libffi8:amd64. Preparing to unpack .../38-libffi8_3.5.2-3_amd64.deb ... Unpacking libffi8:amd64 (3.5.2-3) ... Selecting previously unselected package libyaml-0-2:amd64. Preparing to unpack .../39-libyaml-0-2_0.2.5-2+b1_amd64.deb ... Unpacking libyaml-0-2:amd64 (0.2.5-2+b1) ... Selecting previously unselected package libruby3.3:amd64. Preparing to unpack .../40-libruby3.3_3.3.8-2_amd64.deb ... Unpacking libruby3.3:amd64 (3.3.8-2) ... Selecting previously unselected package ruby3.3. Preparing to unpack .../41-ruby3.3_3.3.8-2_amd64.deb ... Unpacking ruby3.3 (3.3.8-2) ... Selecting previously unselected package libruby:amd64. Preparing to unpack .../42-libruby_1%3a3.3+b1_amd64.deb ... Unpacking libruby:amd64 (1:3.3+b1) ... Selecting previously unselected package ruby-rubygems. Preparing to unpack .../43-ruby-rubygems_3.6.7-2_all.deb ... Unpacking ruby-rubygems (3.6.7-2) ... Selecting previously unselected package ruby. Preparing to unpack .../44-ruby_1%3a3.3+b1_amd64.deb ... Unpacking ruby (1:3.3+b1) ... Selecting previously unselected package rake. Preparing to unpack .../45-rake_13.2.1-1_all.deb ... Unpacking rake (13.2.1-1) ... Selecting previously unselected package ruby-minitest. Preparing to unpack .../46-ruby-minitest_5.26.1-1_all.deb ... Unpacking ruby-minitest (5.26.1-1) ... Selecting previously unselected package ruby-power-assert. Preparing to unpack .../47-ruby-power-assert_2.0.5-1_all.deb ... Unpacking ruby-power-assert (2.0.5-1) ... Selecting previously unselected package ruby-test-unit. Preparing to unpack .../48-ruby-test-unit_3.6.2-1_all.deb ... Unpacking ruby-test-unit (3.6.2-1) ... Selecting previously unselected package gem2deb-test-runner. Preparing to unpack .../49-gem2deb-test-runner_2.2.6_amd64.deb ... Unpacking gem2deb-test-runner (2.2.6) ... Selecting previously unselected package libgmpxx4ldbl:amd64. Preparing to unpack .../50-libgmpxx4ldbl_2%3a6.3.0+dfsg-5_amd64.deb ... Unpacking libgmpxx4ldbl:amd64 (2:6.3.0+dfsg-5) ... Selecting previously unselected package libgmp-dev:amd64. Preparing to unpack .../51-libgmp-dev_2%3a6.3.0+dfsg-5_amd64.deb ... Unpacking libgmp-dev:amd64 (2:6.3.0+dfsg-5) ... Selecting previously unselected package ruby3.3-dev:amd64. Preparing to unpack .../52-ruby3.3-dev_3.3.8-2_amd64.deb ... Unpacking ruby3.3-dev:amd64 (3.3.8-2) ... Selecting previously unselected package ruby-all-dev:amd64. Preparing to unpack .../53-ruby-all-dev_1%3a3.3+b1_amd64.deb ... Unpacking ruby-all-dev:amd64 (1:3.3+b1) ... Selecting previously unselected package gem2deb. Preparing to unpack .../54-gem2deb_2.2.6_amd64.deb ... Unpacking gem2deb (2.2.6) ... Selecting previously unselected package ruby-diff-lcs. Preparing to unpack .../55-ruby-diff-lcs_1.6.2-1_all.deb ... Unpacking ruby-diff-lcs (1.6.2-1) ... Selecting previously unselected package ruby-rspec-support. Preparing to unpack .../56-ruby-rspec-support_3.13.0c0e0m0s1-2_all.deb ... Unpacking ruby-rspec-support (3.13.0c0e0m0s1-2) ... Selecting previously unselected package ruby-rspec-core. Preparing to unpack .../57-ruby-rspec-core_3.13.0c0e0m0s1-2_all.deb ... Unpacking ruby-rspec-core (3.13.0c0e0m0s1-2) ... Selecting previously unselected package ruby-rspec-expectations. Preparing to unpack .../58-ruby-rspec-expectations_3.13.0c0e0m0s1-2_all.deb ... Unpacking ruby-rspec-expectations (3.13.0c0e0m0s1-2) ... Selecting previously unselected package ruby-rspec-mocks. Preparing to unpack .../59-ruby-rspec-mocks_3.13.0c0e0m0s1-2_all.deb ... Unpacking ruby-rspec-mocks (3.13.0c0e0m0s1-2) ... Selecting previously unselected package ruby-rspec. Preparing to unpack .../60-ruby-rspec_3.13.0c0e0m0s1-2_all.deb ... Unpacking ruby-rspec (3.13.0c0e0m0s1-2) ... Selecting previously unselected package ruby-tty-cursor. Preparing to unpack .../61-ruby-tty-cursor_0.7.1-2_all.deb ... Unpacking ruby-tty-cursor (0.7.1-2) ... Selecting previously unselected package ruby-tty-screen. Preparing to unpack .../62-ruby-tty-screen_0.8.1-2_all.deb ... Unpacking ruby-tty-screen (0.8.1-2) ... Selecting previously unselected package ruby-wisper. Preparing to unpack .../63-ruby-wisper_3.0.0-1_all.deb ... Unpacking ruby-wisper (3.0.0-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../64-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up ruby-wisper (3.0.0-1) ... Setting up libpipeline1:amd64 (1.5.8-2) ... Setting up ruby-tty-screen (0.8.1-2) ... Setting up ruby-ruby2-keywords (0.0.5-1) ... Setting up bsdextrautils (2.41.3-2) ... Setting up ruby-power-assert (2.0.5-1) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:amd64 (0.2.5-2+b1) ... Setting up libxml2-16:amd64 (2.15.1+dfsg-2+b1) ... Setting up libdebhelper-perl (13.29) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.2-1) ... Setting up m4 (1.4.20-2) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.194-1) ... Setting up ruby-minitest (5.26.1-1) ... Setting up autotools-dev (20240727.1) ... Setting up libgmpxx4ldbl:amd64 (2:6.3.0+dfsg-5) ... Setting up ruby-test-unit (3.6.2-1) ... Setting up ruby-net-telnet (0.2.0-1) ... Setting up ruby-csv (3.3.4-1) ... Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.2-1) ... Setting up autoconf (2.72-3.1) ... Setting up ruby-rspec-support (3.13.0c0e0m0s1-2) ... Setting up ruby-webrick (1.9.1-1) ... Setting up libffi8:amd64 (3.5.2-3) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2) ... Setting up ruby-did-you-mean (1.6.3-2) ... Setting up openssl (3.5.4-1) ... Setting up ruby-xmlrpc (0.3.3-2) ... Setting up automake (1:1.18.1-3) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.2-1) ... Setting up libgmp-dev:amd64 (2:6.3.0+dfsg-5) ... Setting up libtool (2.5.4-9) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 150 added, 0 removed; done. Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-10) ... Setting up po-debconf (1.0.22) ... Setting up rubygems-integration (1.19) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.29) ... Setting up rake (13.2.1-1) ... Setting up libruby3.3:amd64 (3.3.8-2) ... Setting up ruby-rubygems (3.6.7-2) ... Setting up ruby3.3-dev:amd64 (3.3.8-2) ... Setting up ruby3.3 (3.3.8-2) ... Setting up libruby:amd64 (1:3.3+b1) ... Setting up ruby-all-dev:amd64 (1:3.3+b1) ... Setting up ruby (1:3.3+b1) ... Setting up ruby-rspec-core (3.13.0c0e0m0s1-2) ... Setting up ruby-diff-lcs (1.6.2-1) ... Setting up gem2deb-test-runner (2.2.6) ... Setting up ruby-tty-cursor (0.7.1-2) ... Setting up ruby-rspec-expectations (3.13.0c0e0m0s1-2) ... Setting up ruby-rspec-mocks (3.13.0c0e0m0s1-2) ... Setting up gem2deb (2.2.6) ... Setting up ruby-rspec (3.13.0c0e0m0s1-2) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-6) ... Processing triggers for ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. +------------------------------------------------------------------------------+ | Check architectures Wed, 24 Dec 2025 22:22:39 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Wed, 24 Dec 2025 22:22:40 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 6.12.57+deb13-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.57-1 (2025-11-05) amd64 (x86_64) Toolchain package versions: binutils_2.45.50.20251209-1 dpkg-dev_1.23.3 g++-15_15.2.0-12 gcc-15_15.2.0-12 libc6-dev_2.42-6 libstdc++-15-dev_15.2.0-12 libstdc++6_15.2.0-12 linux-libc-dev_6.17.13-1 Package versions: apt_3.1.12 autoconf_2.72-3.1 automake_1:1.18.1-3 autopoint_0.23.2-1 autotools-dev_20240727.1 base-files_14 base-passwd_3.6.8 bash_5.3-1 binutils_2.45.50.20251209-1 binutils-common_2.45.50.20251209-1 binutils-x86-64-linux-gnu_2.45.50.20251209-1 bsdextrautils_2.41.3-2 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20250419 coreutils_9.7-3 cpp_4:15.2.0-4 cpp-15_15.2.0-12 cpp-15-x86-64-linux-gnu_15.2.0-12 cpp-x86-64-linux-gnu_4:15.2.0-4 dash_0.5.12-12 debconf_1.5.91 debhelper_13.29 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_21 dh-strip-nondeterminism_1.15.0-1 diffutils_1:3.12-1 dpkg_1.23.3 dpkg-dev_1.23.3 dwz_0.16-2 file_1:5.46-5 findutils_4.10.0-3 g++_4:15.2.0-4 g++-15_15.2.0-12 g++-15-x86-64-linux-gnu_15.2.0-12 g++-x86-64-linux-gnu_4:15.2.0-4 gcc_4:15.2.0-4 gcc-15_15.2.0-12 gcc-15-base_15.2.0-12 gcc-15-x86-64-linux-gnu_15.2.0-12 gcc-x86-64-linux-gnu_4:15.2.0-4 gem2deb_2.2.6 gem2deb-test-runner_2.2.6 gettext_0.23.2-1 gettext-base_0.23.2-1 grep_3.12-1 groff-base_1.23.0-10 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2+b1 libapt-pkg7.0_3.1.12 libarchive-zip-perl_1.68-1 libasan8_15.2.0-12 libatomic1_15.2.0-12 libattr1_1:2.5.2-3 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.45.50.20251209-1 libblkid1_2.41.3-2 libbz2-1.0_1.0.8-6 libc-bin_2.42-6 libc-dev-bin_2.42-6 libc-gconv-modules-extra_2.42-6 libc6_2.42-6 libc6-dev_2.42-6 libcap-ng0_0.8.5-4+b2 libcap2_1:2.75-10+b5 libcc1-0_15.2.0-12 libcrypt-dev_1:4.5.1-1 libcrypt1_1:4.5.1-1 libctf-nobfd0_2.45.50.20251209-1 libctf0_2.45.50.20251209-1 libdb5.3t64_5.3.28+dfsg2-11 libdebconfclient0_0.282+b2 libdebhelper-perl_13.29 libdpkg-perl_1.23.3 libelf1t64_0.194-1 libffi8_3.5.2-3 libfile-stripnondeterminism-perl_1.15.0-1 libgcc-15-dev_15.2.0-12 libgcc-s1_15.2.0-12 libgdbm-compat4t64_1.26-1 libgdbm6t64_1.26-1 libgmp-dev_2:6.3.0+dfsg-5 libgmp10_2:6.3.0+dfsg-5 libgmpxx4ldbl_2:6.3.0+dfsg-5 libgomp1_15.2.0-12 libgprofng0_2.45.50.20251209-1 libhogweed6t64_3.10.2-1 libhwasan0_15.2.0-12 libisl23_0.27-1 libitm1_15.2.0-12 libjansson4_2.14-2+b4 liblsan0_15.2.0-12 liblz4-1_1.10.0-6 liblzma5_5.8.1-2 libmagic-mgc_1:5.46-5 libmagic1t64_1:5.46-5 libmd0_1.1.0-2+b1 libmount1_2.41.3-2 libmpc3_1.3.1-2 libmpfr6_4.2.2-2 libnettle8t64_3.10.2-1 libpam-modules_1.7.0-5 libpam-modules-bin_1.7.0-5 libpam-runtime_1.7.0-5 libpam0g_1.7.0-5 libpcre2-8-0_10.46-1 libperl5.40_5.40.1-7 libpipeline1_1.5.8-2 libquadmath0_15.2.0-12 libruby_1:3.3+b1 libruby3.3_3.3.8-2 libseccomp2_2.6.0-2+b1 libselinux1_3.9-4+rebuild1766544377 libsframe2_2.45.50.20251209-1 libsmartcols1_2.41.3-2 libssl3t64_3.5.4-1 libstdc++-15-dev_15.2.0-12 libstdc++6_15.2.0-12 libsystemd0_259-1 libtinfo6_6.5+20251123-1 libtool_2.5.4-9 libtsan2_15.2.0-12 libubsan1_15.2.0-12 libuchardet0_0.0.8-2 libudev1_259-1 libunistring5_1.3-2 libuuid1_2.41.3-2 libxml2-16_2.15.1+dfsg-2+b1 libxxhash0_0.8.3-2 libyaml-0-2_0.2.5-2+b1 libzstd1_1.5.7+dfsg-2 linux-libc-dev_6.17.13-1 m4_1.4.20-2 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20250131-2 ncurses-base_6.5+20251123-1 ncurses-bin_6.5+20251123-1 openssl_3.5.4-1 openssl-provider-legacy_3.5.4-1 patch_2.8-2 perl_5.40.1-7 perl-base_5.40.1-7 perl-modules-5.40_5.40.1-7 po-debconf_1.0.22 rake_13.2.1-1 rpcsvc-proto_1.4.3-1 ruby_1:3.3+b1 ruby-all-dev_1:3.3+b1 ruby-csv_3.3.4-1 ruby-did-you-mean_1.6.3-2 ruby-diff-lcs_1.6.2-1 ruby-minitest_5.26.1-1 ruby-net-telnet_0.2.0-1 ruby-power-assert_2.0.5-1 ruby-rspec_3.13.0c0e0m0s1-2 ruby-rspec-core_3.13.0c0e0m0s1-2 ruby-rspec-expectations_3.13.0c0e0m0s1-2 ruby-rspec-mocks_3.13.0c0e0m0s1-2 ruby-rspec-support_3.13.0c0e0m0s1-2 ruby-ruby2-keywords_0.0.5-1 ruby-rubygems_3.6.7-2 ruby-test-unit_3.6.2-1 ruby-tty-cursor_0.7.1-2 ruby-tty-screen_0.8.1-2 ruby-webrick_1.9.1-1 ruby-wisper_3.0.0-1 ruby-xmlrpc_0.3.3-2 ruby3.3_3.3.8-2 ruby3.3-dev_3.3.8-2 rubygems-integration_1.19 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.26 sqv_1.3.0-5 sysvinit-utils_3.15-6 tar_1.35+dfsg-3.1 util-linux_2.41.3-2 xz-utils_5.8.1-2 zlib1g_1:1.3.dfsg+really1.3.1-1+b2 +------------------------------------------------------------------------------+ | Build Wed, 24 Dec 2025 22:22:40 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- Format: 3.0 (quilt) Source: ruby-tty-reader Binary: ruby-tty-reader Architecture: all Version: 0.9.0-2+rebuild1766614932 Maintainer: Debian Ruby Team Uploaders: Gabriel Filion , Homepage: https://piotrmurach.github.io/tty Standards-Version: 4.7.2 Vcs-Browser: https://salsa.debian.org/ruby-team/ruby-tty-reader Vcs-Git: https://salsa.debian.org/ruby-team/ruby-tty-reader.git Testsuite: autopkgtest-pkg-ruby Build-Depends: debhelper-compat (= 13), gem2deb (>= 1), rake, ruby-rspec, ruby-tty-cursor (>= 0.7), ruby-tty-screen (>= 0.8), ruby-wisper (>= 2.0.0) Package-List: ruby-tty-reader deb ruby optional arch=all Checksums-Sha1: fc18683a725f97e44f0f3cc091d8369bca3958e4 461051 ruby-tty-reader_0.9.0.orig.tar.gz 418d86910cc94797f69105dfde8fa88c71acc452 3816 ruby-tty-reader_0.9.0-2+rebuild1766614932.debian.tar.xz Checksums-Sha256: 970cab15cfbe28388ec6f86b16b02c09c062be90b84de8ece4a5c1e1db69b555 461051 ruby-tty-reader_0.9.0.orig.tar.gz 6bf2b78e30324197b395e5bc8d9ae86e3f0e340f17ba6fa8b6ba9ef6612bfb07 3816 ruby-tty-reader_0.9.0-2+rebuild1766614932.debian.tar.xz Files: 1e5895124382a8cb011340e9502ae848 461051 ruby-tty-reader_0.9.0.orig.tar.gz dc41da1ac71e6b0a7b1800d109e7d850 3816 ruby-tty-reader_0.9.0-2+rebuild1766614932.debian.tar.xz dpkg-source: warning: extracting unsigned source package (ruby-tty-reader_0.9.0-2+rebuild1766614932.dsc) dpkg-source: info: extracting ruby-tty-reader in /build/reproducible-path/ruby-tty-reader-0.9.0 dpkg-source: info: unpacking ruby-tty-reader_0.9.0.orig.tar.gz dpkg-source: info: unpacking ruby-tty-reader_0.9.0-2+rebuild1766614932.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-drop-bundler.patch dpkg-source: info: applying 0002-Relax-gem-dependency-on-wisper.patch Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands Wed, 24 Dec 2025 22:22:41 +0000 | +------------------------------------------------------------------------------+ apt-get update -q && apt-get install -t experimental -qy ruby-all-dev --------------------------------------------------------------------- Ign:1 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ InRelease Ign:2 file:/mass-rebuild ./ InRelease Get:3 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Release [609 B] Get:4 file:/mass-rebuild ./ Release [1617 B] Ign:5 copy:/build/reproducible-path/resolver-9COgb9/apt_archive ./ Release.gpg Get:4 file:/mass-rebuild ./ Release [1617 B] Ign:6 file:/mass-rebuild ./ Release.gpg Hit:7 http://deb.debian.org/debian unstable InRelease Hit:8 http://deb.debian.org/debian experimental InRelease Hit:9 http://incoming.debian.org/debian-buildd buildd-unstable InRelease Fetched 609 B in 0s (1529 B/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: libruby3.4 ruby3.4 ruby3.4-dev Recommended packages: ruby-sdbm fonts-lato libjs-jquery ruby3.4-doc The following NEW packages will be installed: libruby3.4 ruby3.4 ruby3.4-dev The following packages will be upgraded: ruby-all-dev 1 upgraded, 3 newly installed, 0 to remove and 26 not upgraded. Need to get 8784 kB of archives. After this operation, 36.3 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian experimental/main amd64 libruby3.4 amd64 3.4.5-1~exp1 [6731 kB] Get:2 http://deb.debian.org/debian experimental/main amd64 ruby3.4 amd64 3.4.5-1~exp1 [920 kB] Get:3 http://deb.debian.org/debian experimental/main amd64 ruby3.4-dev amd64 3.4.5-1~exp1 [1127 kB] Get:4 http://deb.debian.org/debian experimental/main amd64 ruby-all-dev amd64 1:3.3+support3.4~0 [6292 B] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline Fetched 8784 kB in 0s (84.5 MB/s) Selecting previously unselected package libruby3.4:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18769 files and directories currently installed.) Preparing to unpack .../libruby3.4_3.4.5-1~exp1_amd64.deb ... Unpacking libruby3.4:amd64 (3.4.5-1~exp1) ... Selecting previously unselected package ruby3.4. Preparing to unpack .../ruby3.4_3.4.5-1~exp1_amd64.deb ... Unpacking ruby3.4 (3.4.5-1~exp1) ... Selecting previously unselected package ruby3.4-dev:amd64. Preparing to unpack .../ruby3.4-dev_3.4.5-1~exp1_amd64.deb ... Unpacking ruby3.4-dev:amd64 (3.4.5-1~exp1) ... Preparing to unpack .../ruby-all-dev_1%3a3.3+support3.4~0_amd64.deb ... Unpacking ruby-all-dev:amd64 (1:3.3+support3.4~0) over (1:3.3+b1) ... Setting up libruby3.4:amd64 (3.4.5-1~exp1) ... Setting up ruby3.4 (3.4.5-1~exp1) ... Setting up ruby3.4-dev:amd64 (3.4.5-1~exp1) ... Setting up ruby-all-dev:amd64 (1:3.3+support3.4~0) ... Processing triggers for man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Processing triggers for libc-bin (2.42-6) ... I: Finished running 'apt-get update -q && apt-get install -t experimental -qy ruby-all-dev'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=C.UTF-8 LC_ADDRESS=pt_BR.UTF-8 LC_ALL=C.UTF-8 LC_IDENTIFICATION=pt_BR.UTF-8 LC_MEASUREMENT=pt_BR.UTF-8 LC_MONETARY=pt_BR.UTF-8 LC_NAME=pt_BR.UTF-8 LC_NUMERIC=pt_BR.UTF-8 LC_PAPER=pt_BR.UTF-8 LC_TELEPHONE=pt_BR.UTF-8 LC_TIME=pt_BR.UTF-8 LOGNAME=sbuild PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SHELL=/bin/sh USER=sbuild dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -mAutomated rebuild -b dpkg-buildpackage: info: source package ruby-tty-reader dpkg-buildpackage: info: source version 0.9.0-2+rebuild1766614932 dpkg-buildpackage: info: source distribution UNRELEASED dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean --buildsystem=ruby --with ruby dh_auto_clean -O--buildsystem=ruby dh_ruby --clean dh_autoreconf_clean -O--buildsystem=ruby dh_clean -O--buildsystem=ruby debian/rules binary dh binary --buildsystem=ruby --with ruby dh_update_autotools_config -O--buildsystem=ruby dh_autoreconf -O--buildsystem=ruby dh_auto_configure -O--buildsystem=ruby dh_ruby --configure dh_auto_build -O--buildsystem=ruby dh_ruby --build dh_auto_test -O--buildsystem=ruby dh_ruby --test create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=ruby dh_prep -O--buildsystem=ruby dh_auto_install --destdir=debian/ruby-tty-reader/ -O--buildsystem=ruby dh_ruby --install /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader ┌──────────────────────────────────────────────────────────────────────────────┐ │ ruby-tty-reader: Installing files and building extensions for ruby3.3 │ └──────────────────────────────────────────────────────────────────────────────┘ /usr/bin/ruby3.3 -S gem build --config-file /dev/null --verbose /tmp/d20251224-64-k1xsht/gemspec WARNING: open-ended dependency on wisper (>= 3.0) is not recommended if wisper is semantically versioned, use: add_runtime_dependency "wisper", "~> 3.0" WARNING: open-ended dependency on rake (>= 0, development) is not recommended use a bounded requirement, such as "~> x.y" WARNING: open-ended dependency on rspec (>= 3.0, development) is not recommended if rspec is semantically versioned, use: add_development_dependency "rspec", "~> 3.0" WARNING: See https://guides.rubygems.org/specification-reference/ for help Successfully built RubyGem Name: tty-reader Version: 0.9.0 File: tty-reader-0.9.0.gem /usr/bin/ruby3.3 -S gem install --config-file /dev/null --verbose --local --verbose --no-document --ignore-dependencies --install-dir debian/ruby-tty-reader/usr/share/rubygems-integration/all /tmp/d20251224-64-k1xsht/tty-reader-0.9.0.gem /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty-reader.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/console.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/history.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/key_event.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/keys.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/line.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/mode.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/version.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/win_api.rb /build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/win_console.rb Successfully installed tty-reader-0.9.0 1 gem installed cd debian/ruby-tty-reader/usr/share/rubygems-integration/all rm -rf bin rm -rf build_info rm -rf cache rm -rf doc rm -rf extensions rmdir plugins cd gems/tty-reader-0.9.0 rm -f chmod 644 lib/tty/reader/console.rb lib/tty/reader/history.rb lib/tty/reader/key_event.rb lib/tty/reader/keys.rb lib/tty/reader/line.rb lib/tty/reader/mode.rb lib/tty/reader/version.rb lib/tty/reader/win_api.rb lib/tty/reader/win_console.rb lib/tty/reader.rb lib/tty-reader.rb find lib/ -type d -empty -delete cd - cd - dh_installchangelogs -pruby-tty-reader /build/reproducible-path/ruby-tty-reader-0.9.0/CHANGELOG.md upstream /usr/bin/ruby3.3 /usr/bin/gem2deb-test-runner ┌──────────────────────────────────────────────────────────────────────────────┐ │ Checking Rubygems dependency resolution on ruby3.3 │ └──────────────────────────────────────────────────────────────────────────────┘ RUBYLIB=. GEM_PATH=/build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all:/build/reproducible-path/ruby-tty-reader-0.9.0/debian/.debhelper/generated/_source/home/.local/share/gem/ruby/3.3.0:/var/lib/gems/3.3.0:/usr/local/lib/ruby/gems/3.3.0:/usr/lib/ruby/gems/3.3.0:/usr/lib/x86_64-linux-gnu/ruby/gems/3.3.0:/usr/share/rubygems-integration/3.3.0:/usr/share/rubygems-integration/all:/usr/lib/x86_64-linux-gnu/rubygems-integration/3.3.0 ruby3.3 -e gem\ \"tty-reader\" ┌──────────────────────────────────────────────────────────────────────────────┐ │ Run tests for ruby3.3 from debian/ruby-tests.rake │ └──────────────────────────────────────────────────────────────────────────────┘ RUBYLIB=. GEM_PATH=/build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all:/build/reproducible-path/ruby-tty-reader-0.9.0/debian/.debhelper/generated/_source/home/.local/share/gem/ruby/3.3.0:/var/lib/gems/3.3.0:/usr/local/lib/ruby/gems/3.3.0:/usr/lib/ruby/gems/3.3.0:/usr/lib/x86_64-linux-gnu/ruby/gems/3.3.0:/usr/share/rubygems-integration/3.3.0:/usr/share/rubygems-integration/all:/usr/lib/x86_64-linux-gnu/rubygems-integration/3.3.0 ruby3.3 -S rake --rakelibdir /gem2deb-nonexistent -f debian/ruby-tests.rake /usr/bin/ruby3.3 -I/usr/share/rubygems-integration/all/gems/rspec-support-3.13.1/lib:/usr/share/rubygems-integration/all/gems/rspec-core-3.13.0/lib /usr/share/rubygems-integration/all/gems/rspec-core-3.13.0/exe/rspec --pattern ./spec/\*\*/\*_spec.rb --format documentation Randomized with seed 33679 TTY::Reader#with_history_disabled leaves the line alone on :up leaves the line alone on :down TTY::Reader#publish_keypress_event publishes :keyescape events subscribes to ctrl+X type of event event publishes :keypress events publishes :keyreturn event publishes :keydown event for read_keypress subscribes to multiple events publishes :keyup for read_keypress publishes :keynum event TTY::Reader::History retrieves current line checks if navigation is possible defaults maximum size presents string representation iterates over lines allows duplicates allows to cycle through non-empty buffer excludes lines matching pattern returns enumerator when iterating without a block clears all lines prevents duplicates gets line based on index adds items to history without overflowing navigates through history buffer with cycling navigates through history buffer without cycling doesn't navigate through empty buffer has no lines excludes empty lines by default TTY::Reader#read_line buffers non-empty input and restores it back when history has no more lines echoes characters back restores empty line when history has no more lines reads multibyte line doesn't echo characters back supports multiline prompts displays a prompt before input masks characters displays custom input with a prompt deletes characters when backspace pressed TTY::Reader#read_keypress reads multibyte key press reads single key press when Ctrl+C pressed skips handler when handler is nil exits with 130 code when :exit option is chosen evaluates custom handler when proc object is provided defaults to raising InputInterrupt sends interrupt signal when :signal option is chosen TTY::Reader#subscribe subscribes to listen to events only in a block subscribes to receive events TTY::Reader::KeyEvent#from parses \\[\[A as f1 key parses \OQ as f2 key parses uppercase char parses \\[19\~ as f8 key parses \\[3\~ as delete key parses \\[7\~ as home key parses \\[\[B as f2 key parses \\[C as right key parses \\[11\~ as f1 key parses \\[24\~ as f12 key parses \\[H as home key parses \\[23\~ as f11 key parses \\[20\~ as f9 key parses \\[B as down key parses \\[18\~ as f7 key parses \\[A as up key parses \\[D as left key parses backspace parses \\[12\~ as f2 key parses \\[17\~ as f6 key parses \OP as f1 key parses \\[\[D as f4 key parses \\[5\~ as page_up key parses \\[21\~ as f10 key parses \\[\[E as f5 key parses \OS as f4 key parses uknown key parses lowercase char parses ctrl-a to ctrl-z inputs parses \\[13\~ as f3 key parses \\[15\~ as f5 key parses \\[14\~ as f4 key parses \OR as f3 key parses \\[2\~ as insert key parses \\[4\~ as end key parses \\[1\~ as home key parses \\[\[C as f3 key parses number char parses \\[E as clear key parses \\[6\~ as page_down key exposes line value parses \OF as end key parses \\[F as end key TTY::Reader::Line moves cursor left and right inserts characters inside a line removes char before current cursor position inserts chars in empty string inserts char inside the line inserts char outside of the line size inserts char at end of the line provides access to the prompt inserts char at start of the line inserts characters with #insert call deletes char under current cursor position replaces current line with new preserving cursor TTY::Reader#read_multiline reads lines with a prompt skips empty lines sets initial input line reads no lines reads a line and terminates on Ctrl+d reads lines with echo off reads multibyte lines reads and yiels every line reads few lines reads a line and terminates on Ctrl+z Top 2 slowest examples (0.05583 seconds, 57.3% of total time): TTY::Reader#with_history_disabled leaves the line alone on :up 0.05124 seconds ./spec/unit/history_disabled_spec.rb:13 TTY::Reader#read_multiline reads and yiels every line 0.00458 seconds ./spec/unit/read_multiline_spec.rb:45 Top 2 slowest example groups: TTY::Reader#with_history_disabled 0.02616 seconds average (0.05232 seconds / 2 examples) ./spec/unit/history_disabled_spec.rb:3 TTY::Reader#read_multiline 0.0016 seconds average (0.01598 seconds / 10 examples) ./spec/unit/read_multiline_spec.rb:3 Finished in 0.09747 seconds (files took 0.10702 seconds to load) 112 examples, 0 failures Randomized with seed 33679 /usr/bin/ruby3.4 /usr/bin/gem2deb-test-runner ┌──────────────────────────────────────────────────────────────────────────────┐ │ Checking Rubygems dependency resolution on ruby3.4 │ └──────────────────────────────────────────────────────────────────────────────┘ RUBYLIB=. GEM_PATH=/build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all:/build/reproducible-path/ruby-tty-reader-0.9.0/debian/.debhelper/generated/_source/home/.local/share/gem/ruby/3.4.0:/var/lib/gems/3.4.0:/usr/local/lib/ruby/gems/3.4.0:/usr/lib/ruby/gems/3.4.0:/usr/lib/x86_64-linux-gnu/ruby/gems/3.4.0:/usr/share/rubygems-integration/3.4.0:/usr/share/rubygems-integration/all:/usr/lib/x86_64-linux-gnu/rubygems-integration/3.4.0 ruby3.4 -e gem\ \"tty-reader\" ┌──────────────────────────────────────────────────────────────────────────────┐ │ Run tests for ruby3.4 from debian/ruby-tests.rake │ └──────────────────────────────────────────────────────────────────────────────┘ RUBYLIB=. GEM_PATH=/build/reproducible-path/ruby-tty-reader-0.9.0/debian/ruby-tty-reader/usr/share/rubygems-integration/all:/build/reproducible-path/ruby-tty-reader-0.9.0/debian/.debhelper/generated/_source/home/.local/share/gem/ruby/3.4.0:/var/lib/gems/3.4.0:/usr/local/lib/ruby/gems/3.4.0:/usr/lib/ruby/gems/3.4.0:/usr/lib/x86_64-linux-gnu/ruby/gems/3.4.0:/usr/share/rubygems-integration/3.4.0:/usr/share/rubygems-integration/all:/usr/lib/x86_64-linux-gnu/rubygems-integration/3.4.0 ruby3.4 -S rake --rakelibdir /gem2deb-nonexistent -f debian/ruby-tests.rake /usr/bin/ruby3.4 -I/usr/share/rubygems-integration/all/gems/rspec-support-3.13.1/lib:/usr/share/rubygems-integration/all/gems/rspec-core-3.13.0/lib /usr/share/rubygems-integration/all/gems/rspec-core-3.13.0/exe/rspec --pattern ./spec/\*\*/\*_spec.rb --format documentation Randomized with seed 27611 TTY::Reader#with_history_disabled leaves the line alone on :up leaves the line alone on :down TTY::Reader::KeyEvent#from parses uppercase char parses \\[2\~ as insert key parses \\[4\~ as end key parses \\[B as down key parses \\[E as clear key parses \\[D as left key parses \\[24\~ as f12 key parses \\[23\~ as f11 key parses \OR as f3 key parses \\[5\~ as page_up key parses \\[\[E as f5 key parses \\[17\~ as f6 key parses number char parses uknown key exposes line value parses \\[\[B as f2 key parses \OQ as f2 key parses \\[21\~ as f10 key parses \\[14\~ as f4 key parses \\[C as right key parses \\[11\~ as f1 key parses \\[19\~ as f8 key parses \\[\[A as f1 key parses ctrl-a to ctrl-z inputs parses backspace parses \\[18\~ as f7 key parses lowercase char parses \\[15\~ as f5 key parses \\[7\~ as home key parses \\[A as up key parses \\[3\~ as delete key parses \OS as f4 key parses \\[F as end key parses \\[1\~ as home key parses \\[6\~ as page_down key parses \\[20\~ as f9 key parses \\[13\~ as f3 key parses \\[\[C as f3 key parses \\[12\~ as f2 key parses \OF as end key parses \\[H as home key parses \OP as f1 key parses \\[\[D as f4 key TTY::Reader#subscribe subscribes to listen to events only in a block subscribes to receive events TTY::Reader#read_line doesn't echo characters back supports multiline prompts displays custom input with a prompt reads multibyte line deletes characters when backspace pressed buffers non-empty input and restores it back when history has no more lines echoes characters back displays a prompt before input restores empty line when history has no more lines masks characters TTY::Reader#read_multiline reads no lines reads lines with echo off reads few lines reads a line and terminates on Ctrl+z reads a line and terminates on Ctrl+d reads lines with a prompt reads multibyte lines skips empty lines sets initial input line reads and yiels every line TTY::Reader::Line inserts char inside the line moves cursor left and right inserts char at end of the line inserts char at start of the line inserts chars in empty string deletes char under current cursor position inserts characters with #insert call inserts characters inside a line removes char before current cursor position replaces current line with new preserving cursor inserts char outside of the line size provides access to the prompt TTY::Reader#publish_keypress_event publishes :keynum event publishes :keyup for read_keypress publishes :keyreturn event publishes :keydown event for read_keypress publishes :keypress events publishes :keyescape events subscribes to ctrl+X type of event event subscribes to multiple events TTY::Reader::History gets line based on index doesn't navigate through empty buffer returns enumerator when iterating without a block iterates over lines retrieves current line excludes lines matching pattern prevents duplicates navigates through history buffer with cycling has no lines defaults maximum size allows duplicates allows to cycle through non-empty buffer navigates through history buffer without cycling clears all lines excludes empty lines by default checks if navigation is possible adds items to history without overflowing presents string representation TTY::Reader#read_keypress reads single key press reads multibyte key press when Ctrl+C pressed exits with 130 code when :exit option is chosen skips handler when handler is nil sends interrupt signal when :signal option is chosen evaluates custom handler when proc object is provided defaults to raising InputInterrupt Top 2 slowest examples (0.03771 seconds, 42.8% of total time): TTY::Reader#with_history_disabled leaves the line alone on :up 0.03327 seconds ./spec/unit/history_disabled_spec.rb:13 TTY::Reader#read_multiline skips empty lines 0.00444 seconds ./spec/unit/read_multiline_spec.rb:38 Top 2 slowest example groups: TTY::Reader#with_history_disabled 0.01725 seconds average (0.0345 seconds / 2 examples) ./spec/unit/history_disabled_spec.rb:3 TTY::Reader#read_multiline 0.00164 seconds average (0.01642 seconds / 10 examples) ./spec/unit/read_multiline_spec.rb:3 Finished in 0.08808 seconds (files took 0.10702 seconds to load) 112 examples, 0 failures Randomized with seed 27611 ┌──────────────────────────────────────────────────────────────────────────────┐ │ dh_ruby --install finished │ └──────────────────────────────────────────────────────────────────────────────┘ dh_installdocs -O--buildsystem=ruby dh_ruby_fixdocs -O--buildsystem=ruby dh_installchangelogs -O--buildsystem=ruby dh_installexamples -O--buildsystem=ruby dh_installsystemduser -O--buildsystem=ruby dh_perl -O--buildsystem=ruby dh_link -O--buildsystem=ruby dh_strip_nondeterminism -O--buildsystem=ruby dh_compress -X.rb -O--buildsystem=ruby dh_fixperms -O--buildsystem=ruby dh_missing -O--buildsystem=ruby dh_ruby_fixdepends -O--buildsystem=ruby dh_installdeb -O--buildsystem=ruby dh_gencontrol -O--buildsystem=ruby dpkg-gencontrol: warning: Depends field of package ruby-tty-reader: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums -O--buildsystem=ruby dh_builddeb -O--buildsystem=ruby dpkg-deb: building package 'ruby-tty-reader' in '../ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb'. dpkg-genbuildinfo --build=binary -O../ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.buildinfo dpkg-genchanges --build=binary -mAutomated rebuild -O../ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2025-12-24T22:22:47Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Wed, 24 Dec 2025 22:22:48 +0000 | +------------------------------------------------------------------------------+ ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.changes: -------------------------------------------------------- Format: 1.8 Date: Wed, 24 Dec 2025 22:22:12 +0000 Source: ruby-tty-reader Binary: ruby-tty-reader Architecture: all Version: 0.9.0-2+rebuild1766614932 Distribution: unstable Urgency: medium Maintainer: Automated rebuild Changed-By: mass-rebuild Description: ruby-tty-reader - Library for processing keyboard input in character, line and mult Changes: ruby-tty-reader (0.9.0-2+rebuild1766614932) UNRELEASED; urgency=medium . * Rebuild with mass-rebuild Checksums-Sha1: dedbf38793004d4d0ae03126ef044fde3fefb361 18424 ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb db767a0027b42e82b9b44e806d91c411e949a05b 5780 ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.buildinfo Checksums-Sha256: bd6235da68b40748d3d4e360135e0a236234d749477245e92d6e67077d2d0ec6 18424 ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb 1cc64c7363930b00bec060d5adf4b1363992a470e705e0eeab6b1de063f1e5de 5780 ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.buildinfo Files: 631425f668c3b5aee853defb1b80cfa0 18424 ruby optional ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb a3bbba9e311bd5da3b7b7d1366ff1b57 5780 ruby optional ruby-tty-reader_0.9.0-2+rebuild1766614932_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo Wed, 24 Dec 2025 22:22:48 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: ruby-tty-reader Binary: ruby-tty-reader Architecture: all Version: 0.9.0-2+rebuild1766614932 Checksums-Md5: 631425f668c3b5aee853defb1b80cfa0 18424 ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb Checksums-Sha1: dedbf38793004d4d0ae03126ef044fde3fefb361 18424 ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb Checksums-Sha256: bd6235da68b40748d3d4e360135e0a236234d749477245e92d6e67077d2d0ec6 18424 ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Wed, 24 Dec 2025 22:22:47 +0000 Build-Path: /build/reproducible-path/ruby-tty-reader-0.9.0 Installed-Build-Depends: autoconf (= 2.72-3.1), automake (= 1:1.18.1-3), autopoint (= 0.23.2-1), autotools-dev (= 20240727.1), base-files (= 14), base-passwd (= 3.6.8), bash (= 5.3-1), binutils (= 2.45.50.20251209-1), binutils-common (= 2.45.50.20251209-1), binutils-x86-64-linux-gnu (= 2.45.50.20251209-1), bsdextrautils (= 2.41.3-2), build-essential (= 12.12), bzip2 (= 1.0.8-6), ca-certificates (= 20250419), coreutils (= 9.7-3), cpp (= 4:15.2.0-4), cpp-15 (= 15.2.0-12), cpp-15-x86-64-linux-gnu (= 15.2.0-12), cpp-x86-64-linux-gnu (= 4:15.2.0-4), dash (= 0.5.12-12), debconf (= 1.5.91), debhelper (= 13.29), debianutils (= 5.23.2), dh-autoreconf (= 21), dh-strip-nondeterminism (= 1.15.0-1), diffutils (= 1:3.12-1), dpkg (= 1.23.3), dpkg-dev (= 1.23.3), dwz (= 0.16-2), file (= 1:5.46-5), findutils (= 4.10.0-3), g++ (= 4:15.2.0-4), g++-15 (= 15.2.0-12), g++-15-x86-64-linux-gnu (= 15.2.0-12), g++-x86-64-linux-gnu (= 4:15.2.0-4), gcc (= 4:15.2.0-4), gcc-15 (= 15.2.0-12), gcc-15-base (= 15.2.0-12), gcc-15-x86-64-linux-gnu (= 15.2.0-12), gcc-x86-64-linux-gnu (= 4:15.2.0-4), gem2deb (= 2.2.6), gem2deb-test-runner (= 2.2.6), gettext (= 0.23.2-1), gettext-base (= 0.23.2-1), grep (= 3.12-1), groff-base (= 1.23.0-10), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2+b1), libarchive-zip-perl (= 1.68-1), libasan8 (= 15.2.0-12), libatomic1 (= 15.2.0-12), libattr1 (= 1:2.5.2-3), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.45.50.20251209-1), libblkid1 (= 2.41.3-2), libbz2-1.0 (= 1.0.8-6), libc-bin (= 2.42-6), libc-dev-bin (= 2.42-6), libc-gconv-modules-extra (= 2.42-6), libc6 (= 2.42-6), libc6-dev (= 2.42-6), libcap-ng0 (= 0.8.5-4+b2), libcap2 (= 1:2.75-10+b5), libcc1-0 (= 15.2.0-12), libcrypt-dev (= 1:4.5.1-1), libcrypt1 (= 1:4.5.1-1), libctf-nobfd0 (= 2.45.50.20251209-1), libctf0 (= 2.45.50.20251209-1), libdb5.3t64 (= 5.3.28+dfsg2-11), libdebconfclient0 (= 0.282+b2), libdebhelper-perl (= 13.29), libdpkg-perl (= 1.23.3), libelf1t64 (= 0.194-1), libffi8 (= 3.5.2-3), libfile-stripnondeterminism-perl (= 1.15.0-1), libgcc-15-dev (= 15.2.0-12), libgcc-s1 (= 15.2.0-12), libgdbm-compat4t64 (= 1.26-1), libgdbm6t64 (= 1.26-1), libgmp-dev (= 2:6.3.0+dfsg-5), libgmp10 (= 2:6.3.0+dfsg-5), libgmpxx4ldbl (= 2:6.3.0+dfsg-5), libgomp1 (= 15.2.0-12), libgprofng0 (= 2.45.50.20251209-1), libhwasan0 (= 15.2.0-12), libisl23 (= 0.27-1), libitm1 (= 15.2.0-12), libjansson4 (= 2.14-2+b4), liblsan0 (= 15.2.0-12), liblzma5 (= 5.8.1-2), libmagic-mgc (= 1:5.46-5), libmagic1t64 (= 1:5.46-5), libmd0 (= 1.1.0-2+b1), libmount1 (= 2.41.3-2), libmpc3 (= 1.3.1-2), libmpfr6 (= 4.2.2-2), libpam-modules (= 1.7.0-5), libpam-modules-bin (= 1.7.0-5), libpam-runtime (= 1.7.0-5), libpam0g (= 1.7.0-5), libpcre2-8-0 (= 10.46-1), libperl5.40 (= 5.40.1-7), libpipeline1 (= 1.5.8-2), libquadmath0 (= 15.2.0-12), libruby (= 1:3.3+b1), libruby3.3 (= 3.3.8-2), libruby3.4 (= 3.4.5-1~exp1), libseccomp2 (= 2.6.0-2+b1), libselinux1 (= 3.9-4+rebuild1766544377), libsframe2 (= 2.45.50.20251209-1), libsmartcols1 (= 2.41.3-2), libssl3t64 (= 3.5.4-1), libstdc++-15-dev (= 15.2.0-12), libstdc++6 (= 15.2.0-12), libsystemd0 (= 259-1), libtinfo6 (= 6.5+20251123-1), libtool (= 2.5.4-9), libtsan2 (= 15.2.0-12), libubsan1 (= 15.2.0-12), libuchardet0 (= 0.0.8-2), libudev1 (= 259-1), libunistring5 (= 1.3-2), libuuid1 (= 2.41.3-2), libxml2-16 (= 2.15.1+dfsg-2+b1), libyaml-0-2 (= 0.2.5-2+b1), libzstd1 (= 1.5.7+dfsg-2), linux-libc-dev (= 6.17.13-1), m4 (= 1.4.20-2), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20250131-2), ncurses-base (= 6.5+20251123-1), ncurses-bin (= 6.5+20251123-1), openssl (= 3.5.4-1), openssl-provider-legacy (= 3.5.4-1), patch (= 2.8-2), perl (= 5.40.1-7), perl-base (= 5.40.1-7), perl-modules-5.40 (= 5.40.1-7), po-debconf (= 1.0.22), rake (= 13.2.1-1), rpcsvc-proto (= 1.4.3-1), ruby (= 1:3.3+b1), ruby-all-dev (= 1:3.3+support3.4~0), ruby-csv (= 3.3.4-1), ruby-did-you-mean (= 1.6.3-2), ruby-diff-lcs (= 1.6.2-1), ruby-minitest (= 5.26.1-1), ruby-net-telnet (= 0.2.0-1), ruby-power-assert (= 2.0.5-1), ruby-rspec (= 3.13.0c0e0m0s1-2), ruby-rspec-core (= 3.13.0c0e0m0s1-2), ruby-rspec-expectations (= 3.13.0c0e0m0s1-2), ruby-rspec-mocks (= 3.13.0c0e0m0s1-2), ruby-rspec-support (= 3.13.0c0e0m0s1-2), ruby-ruby2-keywords (= 0.0.5-1), ruby-rubygems (= 3.6.7-2), ruby-test-unit (= 3.6.2-1), ruby-tty-cursor (= 0.7.1-2), ruby-tty-screen (= 0.8.1-2), ruby-webrick (= 1.9.1-1), ruby-wisper (= 3.0.0-1), ruby-xmlrpc (= 0.3.3-2), ruby3.3 (= 3.3.8-2), ruby3.3-dev (= 3.3.8-2), ruby3.4 (= 3.4.5-1~exp1), ruby3.4-dev (= 3.4.5-1~exp1), rubygems-integration (= 1.19), sed (= 4.9-2), sensible-utils (= 0.0.26), sysvinit-utils (= 3.15-6), tar (= 1.35+dfsg-3.1), util-linux (= 2.41.3-2), xz-utils (= 5.8.1-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1+b2) Environment: DEB_BUILD_OPTIONS="parallel=8" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" SOURCE_DATE_EPOCH="1766614932" +------------------------------------------------------------------------------+ | Package contents Wed, 24 Dec 2025 22:22:48 +0000 | +------------------------------------------------------------------------------+ ruby-tty-reader_0.9.0-2+rebuild1766614932_all.deb ------------------------------------------------- new Debian package, version 2.0. size 18424 bytes: control archive=1400 bytes. 719 bytes, 16 lines control 2289 bytes, 23 lines md5sums Package: ruby-tty-reader Version: 0.9.0-2+rebuild1766614932 Architecture: all Maintainer: Debian Ruby Team Installed-Size: 74 Depends: ruby-tty-screen (>= 0.8), ruby-tty-cursor (>= 0.7), ruby-wisper (>= 3.0) Section: ruby Priority: optional Homepage: https://piotrmurach.github.io/tty Description: Library for processing keyboard input in character, line and multiline modes This pure Ruby library allows terminal applications to provide convenient text input. It maintains a history of entered input with an ability to recall and re-edit those inputs. It can listen for keystroke events and trigger custom key events. . It is a component of the TTY Toolkit. drwxr-xr-x root/root 0 2025-12-24 22:22 ./ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/doc/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/doc/ruby-tty-reader/ -rw-r--r-- root/root 4380 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/README.md.gz -rw-r--r-- root/root 959 2025-12-24 22:22 ./usr/share/doc/ruby-tty-reader/changelog.Debian.gz -rw-r--r-- root/root 1353 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/changelog.gz -rw-r--r-- root/root 1522 2025-12-19 09:42 ./usr/share/doc/ruby-tty-reader/copyright drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/doc/ruby-tty-reader/examples/ -rw-r--r-- root/root 323 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/keypress.rb -rw-r--r-- root/root 378 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/keypress_nonblock.rb -rw-r--r-- root/root 154 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/line.rb -rw-r--r-- root/root 216 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/multi_prompt.rb -rw-r--r-- root/root 200 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/multiline.rb -rw-r--r-- root/root 166 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/noecho.rb -rw-r--r-- root/root 306 2020-12-08 21:51 ./usr/share/doc/ruby-tty-reader/examples/shell.rb drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/ drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/ -rw-r--r-- root/root 30 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty-reader.rb drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/ -rw-r--r-- root/root 13237 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader.rb drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/ -rw-r--r-- root/root 1428 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/console.rb -rw-r--r-- root/root 3807 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/history.rb -rw-r--r-- root/root 1392 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/key_event.rb -rw-r--r-- root/root 4603 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/keys.rb -rw-r--r-- root/root 5411 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/line.rb -rw-r--r-- root/root 764 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/mode.rb -rw-r--r-- root/root 104 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/version.rb -rw-r--r-- root/root 1303 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/win_api.rb -rw-r--r-- root/root 2101 2025-12-24 22:22 ./usr/share/rubygems-integration/all/gems/tty-reader-0.9.0/lib/tty/reader/win_console.rb drwxr-xr-x root/root 0 2025-12-24 22:22 ./usr/share/rubygems-integration/all/specifications/ -rw-r--r-- root/root 1843 2025-12-24 22:22 ./usr/share/rubygems-integration/all/specifications/tty-reader-0.9.0.gemspec +------------------------------------------------------------------------------+ | Post Build Wed, 24 Dec 2025 22:22:49 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Wed, 24 Dec 2025 22:22:49 +0000 | +------------------------------------------------------------------------------+ Purging /build/reproducible-path Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Wed, 24 Dec 2025 22:22:49 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: binary Build-Space: 968 Build-Time: 4 Distribution: unstable Host Architecture: amd64 Install-Time: 8 Job: /home/admin/mass-rebuild/builds/3/ruby-tty-reader/ruby-tty-reader_0.9.0-2+rebuild1766614932.dsc Machine Architecture: amd64 Package: ruby-tty-reader Package-Time: 34 Source-Version: 0.9.0-2+rebuild1766614932 Space: 968 Status: successful Version: 0.9.0-2+rebuild1766614932 -------------------------------------------------------------------------------- Finished at 2025-12-24T22:22:47Z Build needed 00:00:34, 968k disk space