[ 0.000000] Total memory = 512MB; using 1024kB for hash table (at (ptrval)) [ 0.000000] Linux version 4.15.0+ (malat@debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #31 Sat Feb 10 13:15:37 CET 2018 [ 0.000000] Found initrd at 0xc0b40000:0xc0fbc000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0x(ptrval) [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: Mac mini [ 0.000000] Using PowerMac machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] ----------------------------------------------------- [ 0.000000] Hash_size = 0x100000 [ 0.000000] phys_mem_size = 0x20000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x000000000422244e [ 0.000000] possible = 0x0000000005a6fd7f [ 0.000000] always = 0x0000000000000000 [ 0.000000] cpu_user_features = 0x9c000001 0x00000000 [ 0.000000] mmu_features = 0x00010001 [ 0.000000] Hash = 0x(ptrval) [ 0.000000] Hash_mask = 0x3fff [ 0.000000] ----------------------------------------------------- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 55 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=820, gen1=819 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 1152 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=UUID=67bd7a8f-23f7-4d32-867a-d2baa6b74edf ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 505092K/524288K available (5332K kernel code, 480K rwdata, 1564K rodata, 712K init, 288K bss, 19196K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfded8000..0xff800000 : early ioremap [ 0.000000] * 0xe1000000..0xfded8000 : vmalloc & ioremap [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 18520 entries in 55 pages [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.620997 MHz [ 0.000000] time_init: processor frequency = 1416.666661 MHz [ 0.000008] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x9995d18e3, max_idle_ns: 440795203336 ns [ 0.000418] clocksource: timebase mult[1806bddd] shift[24] registered [ 0.000647] clockevent: decrementer mult[aa7ac75] shift[32] cpu[0] [ 0.000756] Console: colour dummy device 80x25 [ 0.000951] console [tty0] enabled [ 0.001130] bootconsole [udbg0] disabled [ 0.003178] pid_max: default: 32768 minimum: 301 [ 0.003364] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003380] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004517] MPC7450 family performance monitor hardware support registered [ 0.005793] devtmpfs: initialized [ 0.005860] device: 'platform': device_add [ 0.005906] PM: Adding info for No Bus:platform [ 0.005943] bus: 'platform': registered [ 0.005978] bus: 'cpu': registered [ 0.005985] device: 'cpu': device_add [ 0.006033] PM: Adding info for No Bus:cpu [ 0.006058] bus: 'container': registered [ 0.006063] device: 'container': device_add [ 0.006101] PM: Adding info for No Bus:container [ 0.006438] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1" [ 0.012918] random: get_random_u32 called from bucket_table_alloc+0x84/0x1d0 with crng_init=0 [ 0.013278] bus: 'workqueue': registered [ 0.013289] device: 'workqueue': device_add [ 0.013338] PM: Adding info for No Bus:workqueue [ 0.013454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.013477] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.013873] NET: Registered protocol family 16 [ 0.014363] device class 'bdi': registering [ 0.014407] device class 'pci_bus': registering [ 0.014452] bus: 'pci': registered [ 0.014455] device class 'backlight': registering [ 0.014468] device class 'tty': registering [ 0.014484] device class 'vtconsole': registering [ 0.014504] device: 'vtcon0': device_add [ 0.014560] PM: Adding info for No Bus:vtcon0 [ 0.014611] bus: 'macio': registered [ 0.014649] bus: 'spi': registered [ 0.014651] device class 'spi_master': registering [ 0.015032] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.015057] channel 0 bus [ 0.015065] channel 1 bus [ 0.015179] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.015192] channel 0 bus [ 0.015239] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.015249] channel 1 bus [ 0.015257] channel 2 bus [ 0.015332] device class 'dma': registering [ 0.015506] device: 'cpu0': device_add [ 0.015526] bus: 'cpu': add device cpu0 [ 0.015572] PM: Adding info for cpu:cpu0 [ 0.015787] PCI: Probing PCI hardware [ 0.015823] device: 'pci0000:00': device_add [ 0.015857] PM: Adding info for No Bus:pci0000:00 [ 0.015869] device: '0000:00': device_add [ 0.015926] PM: Adding info for No Bus:0000:00 [ 0.015953] PCI host bridge to bus 0000:00 [ 0.015970] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) [ 0.015995] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.016008] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.016022] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.016036] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.016073] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 [ 0.016157] device: '0000:00:0b.0': device_add [ 0.016177] bus: 'pci': add device 0000:00:0b.0 [ 0.016269] PM: Adding info for pci:0000:00:0b.0 [ 0.016319] pci 0000:00:10.0: [1002:5962] type 00 class 0x030000 [ 0.016338] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref] [ 0.016345] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff] [ 0.016353] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.016373] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.016401] pci 0000:00:10.0: supports D1 D2 [ 0.016408] device: '0000:00:10.0': device_add [ 0.016429] bus: 'pci': add device 0000:00:10.0 [ 0.016513] PM: Adding info for pci:0000:00:10.0 [ 0.016621] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.016646] device: 'pci0001:10': device_add [ 0.016691] PM: Adding info for No Bus:pci0001:10 [ 0.016702] device: '0001:10': device_add [ 0.016840] PM: Adding info for No Bus:0001:10 [ 0.016863] PCI host bridge to bus 0001:10 [ 0.016881] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff] [ 0.016893] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff] [ 0.016906] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff] [ 0.016920] pci_bus 0001:10: root bus resource [bus 10-ff] [ 0.016932] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff [ 0.016960] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000 [ 0.017023] device: '0001:10:0b.0': device_add [ 0.017039] bus: 'pci': add device 0001:10:0b.0 [ 0.017125] PM: Adding info for pci:0001:10:0b.0 [ 0.017172] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000 [ 0.017190] pci 0001:10:12.0: reg 0x10: [mem 0x80084000-0x80085fff] [ 0.017239] pci 0001:10:12.0: supports D1 D2 [ 0.017242] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017252] device: '0001:10:12.0': device_add [ 0.017268] bus: 'pci': add device 0001:10:12.0 [ 0.017373] PM: Adding info for pci:0001:10:12.0 [ 0.017419] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000 [ 0.017435] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.017482] device: '0001:10:17.0': device_add [ 0.017500] bus: 'pci': add device 0001:10:17.0 [ 0.017584] PM: Adding info for pci:0001:10:17.0 [ 0.017622] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310 [ 0.017637] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.017677] device: '0001:10:18.0': device_add [ 0.017691] bus: 'pci': add device 0001:10:18.0 [ 0.017773] PM: Adding info for pci:0001:10:18.0 [ 0.017804] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310 [ 0.017820] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.017861] device: '0001:10:19.0': device_add [ 0.017880] bus: 'pci': add device 0001:10:19.0 [ 0.017956] PM: Adding info for pci:0001:10:19.0 [ 0.017985] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310 [ 0.018000] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff] [ 0.018040] device: '0001:10:1a.0': device_add [ 0.018079] bus: 'pci': add device 0001:10:1a.0 [ 0.018153] PM: Adding info for pci:0001:10:1a.0 [ 0.018193] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310 [ 0.018211] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.018260] pci 0001:10:1b.0: supports D1 D2 [ 0.018263] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.018272] device: '0001:10:1b.0': device_add [ 0.018291] bus: 'pci': add device 0001:10:1b.0 [ 0.018396] PM: Adding info for pci:0001:10:1b.0 [ 0.018435] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310 [ 0.018452] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.018502] pci 0001:10:1b.1: supports D1 D2 [ 0.018505] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.018513] device: '0001:10:1b.1': device_add [ 0.018543] bus: 'pci': add device 0001:10:1b.1 [ 0.018638] PM: Adding info for pci:0001:10:1b.1 [ 0.018681] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.018698] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.018747] pci 0001:10:1b.2: supports D1 D2 [ 0.018750] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.018759] device: '0001:10:1b.2': device_add [ 0.018784] bus: 'pci': add device 0001:10:1b.2 [ 0.018890] PM: Adding info for pci:0001:10:1b.2 [ 0.019174] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10 [ 0.019207] device: 'pci0002:20': device_add [ 0.019252] PM: Adding info for No Bus:pci0002:20 [ 0.019264] device: '0002:20': device_add [ 0.019329] PM: Adding info for No Bus:0002:20 [ 0.019352] PCI host bridge to bus 0002:20 [ 0.019375] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) [ 0.019393] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff] [ 0.019407] pci_bus 0002:20: root bus resource [bus 20-ff] [ 0.019419] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff [ 0.019446] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000 [ 0.019501] device: '0002:20:0b.0': device_add [ 0.019517] bus: 'pci': add device 0002:20:0b.0 [ 0.019599] PM: Adding info for pci:0002:20:0b.0 [ 0.019634] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000 [ 0.019646] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff] [ 0.019678] device: '0002:20:0d.0': device_add [ 0.019700] bus: 'pci': add device 0002:20:0d.0 [ 0.019783] PM: Adding info for pci:0002:20:0d.0 [ 0.019817] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010 [ 0.019830] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff] [ 0.019869] pci 0002:20:0e.0: supports D1 D2 [ 0.019872] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.019880] device: '0002:20:0e.0': device_add [ 0.019896] bus: 'pci': add device 0002:20:0e.0 [ 0.020004] PM: Adding info for pci:0002:20:0e.0 [ 0.020038] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000 [ 0.020052] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff] [ 0.020079] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref] [ 0.020094] device: '0002:20:0f.0': device_add [ 0.020117] bus: 'pci': add device 0002:20:0f.0 [ 0.020199] PM: Adding info for pci:0002:20:0f.0 [ 0.020374] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20 [ 0.020454] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.020469] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff] [ 0.020472] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.020475] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.020481] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff] [ 0.020484] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff] [ 0.020488] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff] [ 0.020492] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff] [ 0.020496] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff] [ 0.020564] Registering platform device 'i2c-powermac.0'. Parent at platform [ 0.020568] device: 'i2c-powermac.0': device_add [ 0.020582] bus: 'platform': add device i2c-powermac.0 [ 0.020634] PM: Adding info for platform:i2c-powermac.0 [ 0.020662] Registering platform device 'i2c-powermac.1'. Parent at platform [ 0.020666] device: 'i2c-powermac.1': device_add [ 0.020676] bus: 'platform': add device i2c-powermac.1 [ 0.020716] PM: Adding info for platform:i2c-powermac.1 [ 0.020735] Registering platform device 'i2c-powermac.2'. Parent at platform [ 0.020738] device: 'i2c-powermac.2': device_add [ 0.020749] bus: 'platform': add device i2c-powermac.2 [ 0.020824] PM: Adding info for platform:i2c-powermac.2 [ 0.020847] Registering platform device 'i2c-powermac.3'. Parent at platform [ 0.020850] device: 'i2c-powermac.3': device_add [ 0.020861] bus: 'platform': add device i2c-powermac.3 [ 0.020900] PM: Adding info for platform:i2c-powermac.3 [ 0.020920] Registering platform device 'i2c-powermac.4'. Parent at platform [ 0.020923] device: 'i2c-powermac.4': device_add [ 0.020934] bus: 'platform': add device i2c-powermac.4 [ 0.020983] PM: Adding info for platform:i2c-powermac.4 [ 0.023690] device: 'writeback': device_add [ 0.023709] bus: 'workqueue': add device writeback [ 0.023758] PM: Adding info for workqueue:writeback [ 0.024036] device class 'block': registering [ 0.024210] device class 'graphics': registering [ 0.024233] device: 'fbcon': device_add [ 0.024278] PM: Adding info for No Bus:fbcon [ 0.024301] device class 'misc': registering [ 0.024322] device: 'vga_arbiter': device_add [ 0.024365] PM: Adding info for No Bus:vga_arbiter [ 0.024467] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.024507] pci 0000:00:10.0: vgaarb: bridge control possible [ 0.024519] pci 0000:00:10.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.024533] vgaarb: loaded [ 0.024867] device class 'scsi_host': registering [ 0.024932] bus: 'scsi': registered [ 0.024934] device class 'scsi_device': registering [ 0.024944] SCSI subsystem initialized [ 0.025059] device class 'ata_link': registering [ 0.025077] device class 'ata_port': registering [ 0.025086] device class 'ata_device': registering [ 0.025107] libata version 3.00 loaded. [ 0.025110] device class 'input': registering [ 0.025134] device class 'rtc': registering [ 0.025148] device class 'power_supply': registering [ 0.025162] device class 'hwmon': registering [ 0.025183] device class 'leds': registering [ 0.025195] device class 'devfreq': registering [ 0.025315] bus: 'nvmem': registered [ 0.025333] device class 'net': registering [ 0.025394] device: 'lo': device_add [ 0.025592] PM: Adding info for No Bus:lo [ 0.025866] device class 'watchdog': registering [ 0.025930] clocksource: Switched to clocksource timebase [ 0.070521] VFS: Disk quotas dquot_6.6.0 [ 0.070607] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.070767] device class 'mem': registering [ 0.070811] device: 'mem': device_add [ 0.070880] PM: Adding info for No Bus:mem [ 0.070991] device: 'null': device_add [ 0.071033] PM: Adding info for No Bus:null [ 0.071088] device: 'port': device_add [ 0.071124] PM: Adding info for No Bus:port [ 0.071167] device: 'zero': device_add [ 0.071219] PM: Adding info for No Bus:zero [ 0.071268] device: 'full': device_add [ 0.071308] PM: Adding info for No Bus:full [ 0.071348] device: 'random': device_add [ 0.071388] PM: Adding info for No Bus:random [ 0.071428] device: 'urandom': device_add [ 0.071476] PM: Adding info for No Bus:urandom [ 0.071516] device: 'kmsg': device_add [ 0.071558] PM: Adding info for No Bus:kmsg [ 0.071603] device: 'tty': device_add [ 0.071656] PM: Adding info for No Bus:tty [ 0.071703] device: 'console': device_add [ 0.071745] PM: Adding info for No Bus:console [ 0.071787] device: 'tty0': device_add [ 0.071830] PM: Adding info for No Bus:tty0 [ 0.071873] device class 'vc': registering [ 0.071900] device: 'vcs': device_add [ 0.071949] PM: Adding info for No Bus:vcs [ 0.071998] device: 'vcsa': device_add [ 0.072036] PM: Adding info for No Bus:vcsa [ 0.072082] device: 'vcs1': device_add [ 0.072127] PM: Adding info for No Bus:vcs1 [ 0.072175] device: 'vcsa1': device_add [ 0.072212] PM: Adding info for No Bus:vcsa1 [ 0.072276] device: 'tty1': device_add [ 0.072320] PM: Adding info for No Bus:tty1 [ 0.072371] device: 'tty2': device_add [ 0.072427] PM: Adding info for No Bus:tty2 [ 0.072475] device: 'tty3': device_add [ 0.072517] PM: Adding info for No Bus:tty3 [ 0.072563] device: 'tty4': device_add [ 0.072604] PM: Adding info for No Bus:tty4 [ 0.072678] device: 'tty5': device_add [ 0.072724] PM: Adding info for No Bus:tty5 [ 0.072776] device: 'tty6': device_add [ 0.072814] PM: Adding info for No Bus:tty6 [ 0.072863] device: 'tty7': device_add [ 0.072909] PM: Adding info for No Bus:tty7 [ 0.072956] device: 'tty8': device_add [ 0.072999] PM: Adding info for No Bus:tty8 [ 0.073043] device: 'tty9': device_add [ 0.073087] PM: Adding info for No Bus:tty9 [ 0.073132] device: 'tty10': device_add [ 0.073181] PM: Adding info for No Bus:tty10 [ 0.073226] device: 'tty11': device_add [ 0.073267] PM: Adding info for No Bus:tty11 [ 0.073313] device: 'tty12': device_add [ 0.073362] PM: Adding info for No Bus:tty12 [ 0.073415] device: 'tty13': device_add [ 0.073456] PM: Adding info for No Bus:tty13 [ 0.073509] device: 'tty14': device_add [ 0.073548] PM: Adding info for No Bus:tty14 [ 0.073598] device: 'tty15': device_add [ 0.073647] PM: Adding info for No Bus:tty15 [ 0.073703] device: 'tty16': device_add [ 0.073746] PM: Adding info for No Bus:tty16 [ 0.073790] device: 'tty17': device_add [ 0.073836] PM: Adding info for No Bus:tty17 [ 0.073880] device: 'tty18': device_add [ 0.073965] PM: Adding info for No Bus:tty18 [ 0.074016] device: 'tty19': device_add [ 0.074059] PM: Adding info for No Bus:tty19 [ 0.074103] device: 'tty20': device_add [ 0.074152] PM: Adding info for No Bus:tty20 [ 0.074211] device: 'tty21': device_add [ 0.074250] PM: Adding info for No Bus:tty21 [ 0.074304] device: 'tty22': device_add [ 0.074342] PM: Adding info for No Bus:tty22 [ 0.074392] device: 'tty23': device_add [ 0.074442] PM: Adding info for No Bus:tty23 [ 0.074488] device: 'tty24': device_add [ 0.074533] PM: Adding info for No Bus:tty24 [ 0.074577] device: 'tty25': device_add [ 0.074624] PM: Adding info for No Bus:tty25 [ 0.074699] device: 'tty26': device_add [ 0.074744] PM: Adding info for No Bus:tty26 [ 0.074810] device: 'tty27': device_add [ 0.074853] PM: Adding info for No Bus:tty27 [ 0.074902] device: 'tty28': device_add [ 0.074947] PM: Adding info for No Bus:tty28 [ 0.075001] device: 'tty29': device_add [ 0.075040] PM: Adding info for No Bus:tty29 [ 0.075092] device: 'tty30': device_add [ 0.075134] PM: Adding info for No Bus:tty30 [ 0.075177] device: 'tty31': device_add [ 0.075228] PM: Adding info for No Bus:tty31 [ 0.075274] device: 'tty32': device_add [ 0.075317] PM: Adding info for No Bus:tty32 [ 0.075362] device: 'tty33': device_add [ 0.075415] PM: Adding info for No Bus:tty33 [ 0.075459] device: 'tty34': device_add [ 0.075503] PM: Adding info for No Bus:tty34 [ 0.075552] device: 'tty35': device_add [ 0.075595] PM: Adding info for No Bus:tty35 [ 0.075657] device: 'tty36': device_add [ 0.075702] PM: Adding info for No Bus:tty36 [ 0.075755] device: 'tty37': device_add [ 0.075799] PM: Adding info for No Bus:tty37 [ 0.075845] device: 'tty38': device_add [ 0.075893] PM: Adding info for No Bus:tty38 [ 0.075940] device: 'tty39': device_add [ 0.075989] PM: Adding info for No Bus:tty39 [ 0.076035] device: 'tty40': device_add [ 0.076078] PM: Adding info for No Bus:tty40 [ 0.076124] device: 'tty41': device_add [ 0.076175] PM: Adding info for No Bus:tty41 [ 0.076220] device: 'tty42': device_add [ 0.076263] PM: Adding info for No Bus:tty42 [ 0.076311] device: 'tty43': device_add [ 0.076349] PM: Adding info for No Bus:tty43 [ 0.076398] device: 'tty44': device_add [ 0.076444] PM: Adding info for No Bus:tty44 [ 0.076497] device: 'tty45': device_add [ 0.076540] PM: Adding info for No Bus:tty45 [ 0.076592] device: 'tty46': device_add [ 0.076634] PM: Adding info for No Bus:tty46 [ 0.076711] device: 'tty47': device_add [ 0.076754] PM: Adding info for No Bus:tty47 [ 0.076800] device: 'tty48': device_add [ 0.076843] PM: Adding info for No Bus:tty48 [ 0.076887] device: 'tty49': device_add [ 0.076947] PM: Adding info for No Bus:tty49 [ 0.076998] device: 'tty50': device_add [ 0.077038] PM: Adding info for No Bus:tty50 [ 0.077089] device: 'tty51': device_add [ 0.077127] PM: Adding info for No Bus:tty51 [ 0.077178] device: 'tty52': device_add [ 0.077228] PM: Adding info for No Bus:tty52 [ 0.077277] device: 'tty53': device_add [ 0.077322] PM: Adding info for No Bus:tty53 [ 0.077366] device: 'tty54': device_add [ 0.077416] PM: Adding info for No Bus:tty54 [ 0.077461] device: 'tty55': device_add [ 0.077504] PM: Adding info for No Bus:tty55 [ 0.077547] device: 'tty56': device_add [ 0.077589] PM: Adding info for No Bus:tty56 [ 0.077634] device: 'tty57': device_add [ 0.077696] PM: Adding info for No Bus:tty57 [ 0.077748] device: 'tty58': device_add [ 0.077788] PM: Adding info for No Bus:tty58 [ 0.077838] device: 'tty59': device_add [ 0.077882] PM: Adding info for No Bus:tty59 [ 0.077958] device: 'tty60': device_add [ 0.078010] PM: Adding info for No Bus:tty60 [ 0.078062] device: 'tty61': device_add [ 0.078107] PM: Adding info for No Bus:tty61 [ 0.078151] device: 'tty62': device_add [ 0.078202] PM: Adding info for No Bus:tty62 [ 0.078246] device: 'tty63': device_add [ 0.078288] PM: Adding info for No Bus:tty63 [ 0.078604] NET: Registered protocol family 2 [ 0.079053] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.079093] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.079126] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.079157] TCP: Hash tables configured (established 4096 bind 4096) [ 0.079282] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.079303] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.079472] NET: Registered protocol family 1 [ 0.079544] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 0.079561] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed. [ 0.079576] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 0.079587] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed. [ 0.079611] pci 0001:10:1a.0: enabling device (0000 -> 0002) [ 0.137980] pci 0001:10:1b.0: enabling device (0000 -> 0002) [ 0.197947] pci 0001:10:1b.1: enabling device (0000 -> 0002) [ 0.257944] pci 0001:10:1b.2: enabling device (0004 -> 0006) [ 0.257986] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.258166] Unpacking initramfs... [ 0.421526] Freeing initrd memory: 4592K [ 0.421648] Registering platform device 'rtc-generic'. Parent at platform [ 0.421655] device: 'rtc-generic': device_add [ 0.421685] bus: 'platform': add device rtc-generic [ 0.421739] PM: Adding info for platform:rtc-generic [ 0.421773] Thermal assist unit not available [ 0.421839] bus: 'mpic': registered [ 0.421848] device: 'mpic': device_add [ 0.421881] PM: Adding info for No Bus:mpic [ 0.422229] device: 'snapshot': device_add [ 0.422278] PM: Adding info for No Bus:snapshot [ 0.422398] bus: 'clocksource': registered [ 0.422405] device: 'clocksource': device_add [ 0.422448] PM: Adding info for No Bus:clocksource [ 0.422457] device: 'clocksource0': device_add [ 0.422466] bus: 'clocksource': add device clocksource0 [ 0.422497] PM: Adding info for clocksource:clocksource0 [ 0.422528] bus: 'platform': add driver alarmtimer [ 0.422567] Registering platform device 'alarmtimer'. Parent at platform [ 0.422570] device: 'alarmtimer': device_add [ 0.422580] bus: 'platform': add device alarmtimer [ 0.422627] PM: Adding info for platform:alarmtimer [ 0.422640] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer [ 0.422646] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer [ 0.422657] devices_kset: Moving alarmtimer to end of list [ 0.422661] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' [ 0.422672] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer [ 0.422727] bus: 'clockevents': registered [ 0.422734] device: 'clockevents': device_add [ 0.422765] PM: Adding info for No Bus:clockevents [ 0.422773] device: 'clockevent0': device_add [ 0.422781] bus: 'clockevents': add device clockevent0 [ 0.422812] PM: Adding info for clockevents:clockevent0 [ 0.423169] bus: 'event_source': registered [ 0.423178] device: 'cpu': device_add [ 0.423188] bus: 'event_source': add device cpu [ 0.423225] PM: Adding info for event_source:cpu [ 0.423240] device: 'breakpoint': device_add [ 0.423247] bus: 'event_source': add device breakpoint [ 0.423280] PM: Adding info for event_source:breakpoint [ 0.423292] device: 'tracepoint': device_add [ 0.423298] bus: 'event_source': add device tracepoint [ 0.423339] PM: Adding info for event_source:tracepoint [ 0.423352] device: 'software': device_add [ 0.423359] bus: 'event_source': add device software [ 0.423393] PM: Adding info for event_source:software [ 0.423417] Initialise system trusted keyrings [ 0.423638] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.127371] random: fast init done [ 2.127795] Key type asymmetric registered [ 2.127810] Asymmetric key parser 'x509' registered [ 2.127854] device class 'bsg': registering [ 2.127892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.127908] io scheduler noop registered [ 2.127916] io scheduler deadline registered [ 2.128184] io scheduler cfq registered (default) [ 2.128197] io scheduler mq-deadline registered [ 2.128583] device class 'phy': registering [ 2.128723] Using unsupported 640x480 ATY,RockHopper2_A at 9c008000, depth=8, pitch=768 [ 2.128800] device: 'fb0': device_add [ 2.128858] PM: Adding info for No Bus:fb0 [ 2.129075] device: 'vtcon1': device_add [ 2.129127] PM: Adding info for No Bus:vtcon1 [ 2.135286] Console: switching to colour frame buffer device 80x30 [ 2.141451] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,RockHopper2Parent@10/ATY,RockHopper2_A@0 [ 2.141818] device: 'ptmx': device_add [ 2.141869] PM: Adding info for No Bus:ptmx [ 2.141977] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.142218] Registering platform device 'serial8250'. Parent at platform [ 2.142221] device: 'serial8250': device_add [ 2.142234] bus: 'platform': add device serial8250 [ 2.142278] PM: Adding info for platform:serial8250 [ 2.142315] device: 'ttyS0': device_add [ 2.142409] PM: Adding info for No Bus:ttyS0 [ 2.142521] device: 'ttyS1': device_add [ 2.142603] PM: Adding info for No Bus:ttyS1 [ 2.142688] device: 'ttyS2': device_add [ 2.142767] PM: Adding info for No Bus:ttyS2 [ 2.142844] device: 'ttyS3': device_add [ 2.142925] PM: Adding info for No Bus:ttyS3 [ 2.142995] bus: 'platform': add driver serial8250 [ 2.143010] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 2.143016] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 2.143028] devices_kset: Moving serial8250 to end of list [ 2.143033] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 2.143045] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 2.143064] bus: 'pci': add driver serial [ 2.143158] bus: 'pci': add driver exar_serial [ 2.143187] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 2.146939] bus: 'macio': add driver pmac_zilog [ 2.146968] Generic non-volatile memory driver v1.1 [ 2.150566] device: 'nvram': device_add [ 2.150612] PM: Adding info for No Bus:nvram [ 2.150680] Linux agpgart interface v0.103 [ 2.154195] bus: 'pci': add driver agpgart-uninorth [ 2.154208] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver agpgart-uninorth [ 2.154212] bus: 'pci': really_probe: probing driver agpgart-uninorth with device 0000:00:0b.0 [ 2.154226] devices_kset: Moving 0000:00:0b.0 to end of list [ 2.154240] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 2.158815] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 2.162358] device: 'agpgart': device_add [ 2.162406] PM: Adding info for No Bus:agpgart [ 2.162470] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 2.166043] driver: 'agpgart-uninorth': driver_bound: bound to device '0000:00:0b.0' [ 2.166071] bus: 'pci': really_probe: bound device 0000:00:0b.0 to driver agpgart-uninorth [ 2.166077] bus: 'pci': driver_probe_device: matched device 0001:10:0b.0 with driver agpgart-uninorth [ 2.166081] bus: 'pci': really_probe: probing driver agpgart-uninorth with device 0001:10:0b.0 [ 2.166095] devices_kset: Moving 0001:10:0b.0 to end of list [ 2.166112] agpgart-uninorth: probe of 0001:10:0b.0 rejects match -19 [ 2.166119] bus: 'pci': driver_probe_device: matched device 0002:20:0b.0 with driver agpgart-uninorth [ 2.166122] bus: 'pci': really_probe: probing driver agpgart-uninorth with device 0002:20:0b.0 [ 2.166132] devices_kset: Moving 0002:20:0b.0 to end of list [ 2.166140] agpgart-uninorth: probe of 0002:20:0b.0 rejects match -19 [ 2.166213] bus: 'pci': add driver macio [ 2.166222] bus: 'pci': driver_probe_device: matched device 0001:10:0b.0 with driver macio [ 2.166225] bus: 'pci': really_probe: probing driver macio with device 0001:10:0b.0 [ 2.166234] devices_kset: Moving 0001:10:0b.0 to end of list [ 2.166242] macio: probe of 0001:10:0b.0 rejects match -19 [ 2.166246] bus: 'pci': driver_probe_device: matched device 0001:10:17.0 with driver macio [ 2.166249] bus: 'pci': really_probe: probing driver macio with device 0001:10:17.0 [ 2.166258] devices_kset: Moving 0001:10:17.0 to end of list [ 2.166264] MacIO PCI driver attached to Intrepid chipset [ 2.169984] device: '0.80000000:mac-io': device_add [ 2.169998] bus: 'macio': add device 0.80000000:mac-io [ 2.170049] PM: Adding info for macio:0.80000000:mac-io [ 2.170095] device: '0.00040000:interrup': device_add [ 2.170117] bus: 'macio': add device 0.00040000:interrup [ 2.170166] PM: Adding info for macio:0.00040000:interrup [ 2.170206] device: '0.00000050:gpio': device_add [ 2.170216] bus: 'macio': add device 0.00000050:gpio [ 2.170262] PM: Adding info for macio:0.00000050:gpio [ 2.170313] device: '0.00013000:escc': device_add [ 2.170325] bus: 'macio': add device 0.00013000:escc [ 2.170377] PM: Adding info for macio:0.00013000:escc [ 2.170429] device: '0.00010000:i2s': device_add [ 2.170441] bus: 'macio': add device 0.00010000:i2s [ 2.170490] PM: Adding info for macio:0.00010000:i2s [ 2.170601] device: '0.00015000:timer': device_add [ 2.170613] bus: 'macio': add device 0.00015000:timer [ 2.170666] PM: Adding info for macio:0.00015000:timer [ 2.170713] device: '0.00016000:via-pmu': device_add [ 2.170726] bus: 'macio': add device 0.00016000:via-pmu [ 2.170772] PM: Adding info for macio:0.00016000:via-pmu [ 2.170820] device: '0.00018000:i2c': device_add [ 2.170831] bus: 'macio': add device 0.00018000:i2c [ 2.170896] PM: Adding info for macio:0.00018000:i2c [ 2.171014] device: '0.00020000:ata-3': device_add [ 2.171026] bus: 'macio': add device 0.00020000:ata-3 [ 2.171072] PM: Adding info for macio:0.00020000:ata-3 [ 2.171212] device: '0.00013020:ch-a': device_add [ 2.171223] bus: 'macio': add device 0.00013020:ch-a [ 2.171269] PM: Adding info for macio:0.00013020:ch-a [ 2.171288] bus: 'macio': driver_probe_device: matched device 0.00013020:ch-a with driver pmac_zilog [ 2.171292] bus: 'macio': really_probe: probing driver pmac_zilog with device 0.00013020:ch-a [ 2.171305] devices_kset: Moving 0.00013020:ch-a to end of list [ 2.171325] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 2.179026] device: 'ttyPZ0': device_add [ 2.179115] PM: Adding info for No Bus:ttyPZ0 [ 2.179239] driver: 'pmac_zilog': driver_bound: bound to device '0.00013020:ch-a' [ 2.179256] bus: 'macio': really_probe: bound device 0.00013020:ch-a to driver pmac_zilog [ 2.179398] device: '0.00013000:ch-b': device_add [ 2.179415] bus: 'macio': add device 0.00013000:ch-b [ 2.179458] PM: Adding info for macio:0.00013000:ch-b [ 2.179484] bus: 'macio': driver_probe_device: matched device 0.00013000:ch-b with driver pmac_zilog [ 2.179487] bus: 'macio': really_probe: probing driver pmac_zilog with device 0.00013000:ch-b [ 2.179499] devices_kset: Moving 0.00013000:ch-b to end of list [ 2.179514] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 2.187541] device: 'ttyPZ1': device_add [ 2.187626] PM: Adding info for No Bus:ttyPZ1 [ 2.187734] driver: 'pmac_zilog': driver_bound: bound to device '0.00013000:ch-b' [ 2.187751] bus: 'macio': really_probe: bound device 0.00013000:ch-b to driver pmac_zilog [ 2.187756] driver: 'macio': driver_bound: bound to device '0001:10:17.0' [ 2.187773] bus: 'pci': really_probe: bound device 0001:10:17.0 to driver macio [ 2.187779] bus: 'pci': driver_probe_device: matched device 0001:10:18.0 with driver macio [ 2.187783] bus: 'pci': really_probe: probing driver macio with device 0001:10:18.0 [ 2.187795] devices_kset: Moving 0001:10:18.0 to end of list [ 2.187807] macio: probe of 0001:10:18.0 rejects match -19 [ 2.187811] bus: 'pci': driver_probe_device: matched device 0001:10:19.0 with driver macio [ 2.187814] bus: 'pci': really_probe: probing driver macio with device 0001:10:19.0 [ 2.187824] devices_kset: Moving 0001:10:19.0 to end of list [ 2.187830] macio: probe of 0001:10:19.0 rejects match -19 [ 2.187834] bus: 'pci': driver_probe_device: matched device 0001:10:1a.0 with driver macio [ 2.187836] bus: 'pci': really_probe: probing driver macio with device 0001:10:1a.0 [ 2.187845] devices_kset: Moving 0001:10:1a.0 to end of list [ 2.187852] macio: probe of 0001:10:1a.0 rejects match -19 [ 2.187857] bus: 'pci': driver_probe_device: matched device 0002:20:0b.0 with driver macio [ 2.187860] bus: 'pci': really_probe: probing driver macio with device 0002:20:0b.0 [ 2.187875] devices_kset: Moving 0002:20:0b.0 to end of list [ 2.187881] macio: probe of 0002:20:0b.0 rejects match -19 [ 2.187885] bus: 'pci': driver_probe_device: matched device 0002:20:0d.0 with driver macio [ 2.187888] bus: 'pci': really_probe: probing driver macio with device 0002:20:0d.0 [ 2.187897] devices_kset: Moving 0002:20:0d.0 to end of list [ 2.187903] macio: probe of 0002:20:0d.0 rejects match -19 [ 2.187906] bus: 'pci': driver_probe_device: matched device 0002:20:0e.0 with driver macio [ 2.187909] bus: 'pci': really_probe: probing driver macio with device 0002:20:0e.0 [ 2.187918] devices_kset: Moving 0002:20:0e.0 to end of list [ 2.187924] macio: probe of 0002:20:0e.0 rejects match -19 [ 2.187928] bus: 'pci': driver_probe_device: matched device 0002:20:0f.0 with driver macio [ 2.187931] bus: 'pci': really_probe: probing driver macio with device 0002:20:0f.0 [ 2.187940] devices_kset: Moving 0002:20:0f.0 to end of list [ 2.187946] macio: probe of 0002:20:0f.0 rejects match -19 [ 2.187983] device: 'pmu': device_add [ 2.188034] PM: Adding info for No Bus:pmu [ 2.188141] device class 'adb': registering [ 2.188164] device: 'adb': device_add [ 2.188202] PM: Adding info for No Bus:adb [ 2.188259] Registering platform device 'adb.0'. Parent at platform [ 2.188262] device: 'adb.0': device_add [ 2.188276] bus: 'platform': add device adb.0 [ 2.188311] PM: Adding info for platform:adb.0 [ 2.188325] bus: 'platform': add driver adb [ 2.188343] bus: 'platform': driver_probe_device: matched device adb.0 with driver adb [ 2.188346] bus: 'platform': really_probe: probing driver adb with device adb.0 [ 2.188353] devices_kset: Moving adb.0 to end of list [ 2.188356] driver: 'adb': driver_bound: bound to device 'adb.0' [ 2.188365] bus: 'platform': really_probe: bound device adb.0 to driver adb [ 2.188386] bus: 'pci': add driver pata-pci-macio [ 2.188511] bus: 'pci': driver_probe_device: matched device 0002:20:0d.0 with driver pata-pci-macio [ 2.188515] bus: 'pci': really_probe: probing driver pata-pci-macio with device 0002:20:0d.0 [ 2.188527] devices_kset: Moving 0002:20:0d.0 to end of list [ 2.188548] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002) [ 2.209956] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 [ 2.218153] MM dmam_alloc_coherent [ 2.218232] device: 'ata1': device_add [ 2.218272] PM: Adding info for No Bus:ata1 [ 2.218282] device: 'ata1': device_add [ 2.218332] PM: Adding info for No Bus:ata1 [ 2.218371] device: 'link1': device_add [ 2.218414] PM: Adding info for No Bus:link1 [ 2.218418] device: 'link1': device_add [ 2.218467] PM: Adding info for No Bus:link1 [ 2.218499] device: 'dev1.0': device_add [ 2.218531] PM: Adding info for No Bus:dev1.0 [ 2.218535] device: 'dev1.0': device_add [ 2.218589] PM: Adding info for No Bus:dev1.0 [ 2.218633] device: 'dev1.1': device_add [ 2.218666] PM: Adding info for No Bus:dev1.1 [ 2.218670] device: 'dev1.1': device_add [ 2.218724] PM: Adding info for No Bus:dev1.1 [ 2.218947] scsi host0: pata_macio [ 2.223232] device: 'host0': device_add [ 2.223246] bus: 'scsi': add device host0 [ 2.223280] PM: Adding info for scsi:host0 [ 2.223303] device: 'host0': device_add [ 2.223398] PM: Adding info for No Bus:host0 [ 2.223422] ata1: PATA max UDMA/100 irq 39 [ 2.227540] driver: 'pata-pci-macio': driver_bound: bound to device '0002:20:0d.0' [ 2.227640] bus: 'pci': really_probe: bound device 0002:20:0d.0 to driver pata-pci-macio [ 2.227693] bus: 'macio': add driver pata-macio [ 2.227713] bus: 'macio': driver_probe_device: matched device 0.00020000:ata-3 with driver pata-macio [ 2.227718] bus: 'macio': really_probe: probing driver pata-macio with device 0.00020000:ata-3 [ 2.227733] devices_kset: Moving 0.00020000:ata-3 to end of list [ 2.437739] ata1.00: ATA-8: WDC WD800BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 2.441915] ata1.00: 156301488 sectors, multi 16: LBA48 [ 2.446018] ata1.01: ATAPI: MATSHITADVD-R UJ-845C, DPP9, max UDMA/66 [ 2.454859] ata1.00: configured for UDMA/100 [ 2.463677] ata1.01: configured for UDMA/66 [ 2.470530] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVE-00 1A11 PQ: 0 ANSI: 5 [ 2.479057] device: 'target0:0:0': device_add [ 2.479077] bus: 'scsi': add device target0:0:0 [ 2.479128] PM: Adding info for scsi:target0:0:0 [ 2.479157] device: '0:0:0:0': device_add [ 2.479251] bus: 'scsi': add device 0:0:0:0 [ 2.479283] PM: Adding info for scsi:0:0:0:0 [ 2.479296] device: '0:0:0:0': device_add [ 2.479356] PM: Adding info for No Bus:0:0:0:0 [ 2.479375] device: '0:0:0:0': device_add [ 2.479425] PM: Adding info for No Bus:0:0:0:0 [ 2.481296] scsi 0:0:1:0: CD-ROM MATSHITA DVD-R UJ-845C DPP9 PQ: 0 ANSI: 5 [ 2.502701] device: 'target0:0:1': device_add [ 2.502721] bus: 'scsi': add device target0:0:1 [ 2.502769] PM: Adding info for scsi:target0:0:1 [ 2.502794] device: '0:0:1:0': device_add [ 2.502879] bus: 'scsi': add device 0:0:1:0 [ 2.502917] PM: Adding info for scsi:0:0:1:0 [ 2.502944] device: '0:0:1:0': device_add [ 2.502993] PM: Adding info for No Bus:0:0:1:0 [ 2.503029] device: '0:0:1:0': device_add [ 2.503077] PM: Adding info for No Bus:0:0:1:0 [ 3.265940] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 [ 3.274315] MM dmam_alloc_coherent [ 3.274417] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dmam_alloc_coherent+0xfc/0x13c [ 3.282829] Modules linked in: [ 3.286908] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0+ #31 [ 3.291075] NIP: c037efb8 LR: c037ef24 CTR: 00000000 [ 3.295246] REGS: df51bc20 TRAP: 0700 Not tainted (4.15.0+) [ 3.299430] MSR: 00029032 CR: 22000428 XER: 20000000 [ 3.303717] GPR00: c037ef24 df51bcd0 df520000 dea9dab0 ddcaab2c ddcaab2c 00000001 00000000 GPR08: 00000000 00000000 c0535ce4 00000306 42000422 00000000 c0004cb8 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c07f0000 GPR24: 00000000 c07bd6a8 00000000 ddc15bec 00001020 014000c0 dea9dab0 ddc27018 [ 3.342278] NIP [c037efb8] dmam_alloc_coherent+0xfc/0x13c [ 3.346704] LR [c037ef24] dmam_alloc_coherent+0x68/0x13c [ 3.351162] Call Trace: [ 3.355513] [df51bcd0] [c037ef24] dmam_alloc_coherent+0x68/0x13c (unreliable) [ 3.360037] [df51bcf0] [c03cb68c] pata_macio_port_start+0x48/0x98 [ 3.364527] [df51bd10] [c03b095c] ata_host_start.part.9+0x108/0x220 [ 3.368986] [df51bd30] [c03b69dc] ata_host_activate+0x70/0x15c [ 3.373486] [df51bd50] [c03cc0ac] pata_macio_common_init+0x310/0x570 [ 3.377964] [df51bdb0] [c038f6c8] macio_device_probe+0x64/0xf8 [ 3.382381] [df51bdd0] [c0368208] driver_probe_device+0x388/0x4a8 [ 3.386764] [df51be00] [c0368460] __driver_attach+0x138/0x13c [ 3.391098] [df51be20] [c0365658] bus_for_each_dev+0x70/0xc0 [ 3.395336] [df51be50] [c0366f8c] bus_add_driver+0x194/0x2a8 [ 3.399468] [df51be70] [c0369200] driver_register+0x94/0x13c [ 3.403493] [df51be80] [c06f101c] pata_macio_init+0x68/0x90 [ 3.407415] [df51bea0] [c0004ae4] do_one_initcall+0x4c/0x178 [ 3.411335] [df51bf00] [c06c2288] kernel_init_freeable+0x138/0x1cc [ 3.415229] [df51bf30] [c0004cdc] kernel_init+0x24/0x118 [ 3.419049] [df51bf40] [c00152e4] ret_from_kernel_thread+0x5c/0x64 [ 3.422872] Instruction dump: [ 3.426601] 7fc4f378 7fe3fb78 93be0004 913e0008 939e0000 4bfed8bd 7fa3eb78 80010024 [ 3.434177] bb61000c 38210020 7c0803a6 4e800020 <0fe00000> 812a0000 2f890000 409eff98 [ 3.441812] ---[ end trace f274d0219329bb59 ]--- [ 3.445691] device: 'ata2': device_add [ 3.445742] PM: Adding info for No Bus:ata2 [ 3.445750] device: 'ata2': device_add [ 3.445802] PM: Adding info for No Bus:ata2 [ 3.445837] device: 'link2': device_add [ 3.445872] PM: Adding info for No Bus:link2 [ 3.445876] device: 'link2': device_add [ 3.445947] PM: Adding info for No Bus:link2 [ 3.445976] device: 'dev2.0': device_add [ 3.446012] PM: Adding info for No Bus:dev2.0 [ 3.446017] device: 'dev2.0': device_add [ 3.446074] PM: Adding info for No Bus:dev2.0 [ 3.446118] device: 'dev2.1': device_add [ 3.446154] PM: Adding info for No Bus:dev2.1 [ 3.446158] device: 'dev2.1': device_add [ 3.446205] PM: Adding info for No Bus:dev2.1 [ 3.446449] scsi host1: pata_macio [ 3.450173] device: 'host1': device_add [ 3.450186] bus: 'scsi': add device host1 [ 3.450225] PM: Adding info for scsi:host1 [ 3.450249] device: 'host1': device_add [ 3.450344] PM: Adding info for No Bus:host1 [ 3.450366] ata2: PATA max MWDMA2 irq 24 [ 3.453980] driver: 'pata-macio': driver_bound: bound to device '0.00020000:ata-3' [ 3.454120] bus: 'macio': really_probe: bound device 0.00020000:ata-3 to driver pata-macio [ 3.454183] device: 'mice': device_add [ 3.454226] PM: Adding info for No Bus:mice [ 3.454340] mousedev: PS/2 mouse device common for all mice [ 3.457943] bus: 'platform': add driver rtc-generic [ 3.457961] bus: 'platform': driver_probe_device: matched device rtc-generic with driver rtc-generic [ 3.457966] bus: 'platform': really_probe: probing driver rtc-generic with device rtc-generic [ 3.457981] devices_kset: Moving rtc-generic to end of list [ 3.460519] device: 'rtc0': device_add [ 3.460593] PM: Adding info for No Bus:rtc0 [ 3.460660] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 3.464288] driver: 'rtc-generic': driver_bound: bound to device 'rtc-generic' [ 3.464301] bus: 'platform': really_probe: bound device rtc-generic to driver rtc-generic [ 3.464409] bus: 'hid': registered [ 3.464416] device class 'hidraw': registering [ 3.464436] hidraw: raw HID events driver (C) Jiri Kosina [ 3.468048] bus: 'hid': add driver hid-generic [ 3.468851] NET: Registered protocol family 10 [ 3.473159] Segment Routing with IPv6 [ 3.476757] NET: Registered protocol family 17 [ 3.480270] drmem: No dynamic reconfiguration memory found [ 3.483808] device: 'cpu_dma_latency': device_add [ 3.483860] PM: Adding info for No Bus:cpu_dma_latency [ 3.483980] device: 'network_latency': device_add [ 3.484026] PM: Adding info for No Bus:network_latency [ 3.484082] device: 'network_throughput': device_add [ 3.484124] PM: Adding info for No Bus:network_throughput [ 3.484173] device: 'memory_bandwidth': device_add [ 3.484224] PM: Adding info for No Bus:memory_bandwidth [ 3.484296] Loading compiled-in X.509 certificates [ 3.487892] kmemleak: Kernel memory leak detector initialized [ 3.491453] kmemleak: Automatic memory scanning thread started [ 3.495360] device: 'input0': device_add [ 3.495461] PM: Adding info for No Bus:input0 [ 3.495499] input: PMU as /devices/virtual/input/input0 [ 3.501587] rtc-generic rtc-generic: setting system clock to 2018-02-10 12:18:32 UTC (1518265112) [ 3.617205] Freeing unused kernel memory: 712K [ 3.621022] This architecture does not have kernel memory protection. [ 3.950554] bus: 'usb': registered [ 3.950574] bus: 'usb': add driver usbfs [ 3.950634] usbcore: registered new interface driver usbfs [ 3.965260] bus: 'scsi': add driver sr [ 3.965284] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sr [ 3.965291] bus: 'scsi': really_probe: probing driver sr with device 0:0:0:0 [ 3.965306] devices_kset: Moving 0:0:0:0 to end of list [ 3.965323] sr: probe of 0:0:0:0 rejects match -19 [ 3.965328] bus: 'scsi': driver_probe_device: matched device 0:0:1:0 with driver sr [ 3.965332] bus: 'scsi': really_probe: probing driver sr with device 0:0:1:0 [ 3.965341] devices_kset: Moving 0:0:1:0 to end of list [ 3.965551] device class 'scsi_disk': registering [ 3.965625] bus: 'scsi': add driver sd [ 3.965643] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 3.965647] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 3.965656] devices_kset: Moving 0:0:0:0 to end of list [ 3.965686] device: '0:0:0:0': device_add [ 3.965823] PM: Adding info for No Bus:0:0:0:0 [ 3.965865] driver: 'sd': driver_bound: bound to device '0:0:0:0' [ 3.970206] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 3.975039] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.984460] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.992842] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.997128] sd 0:0:0:0: [sda] Write Protect is off [ 4.001229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.001301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.012667] bus: 'pci': add driver gem [ 4.012699] bus: 'pci': driver_probe_device: matched device 0002:20:0f.0 with driver gem [ 4.012706] bus: 'pci': really_probe: probing driver gem with device 0002:20:0f.0 [ 4.012721] devices_kset: Moving 0002:20:0f.0 to end of list [ 4.012726] sungem.c:v1.0 David S. Miller [ 4.017188] device: '8:0': device_add [ 4.017264] PM: Adding info for No Bus:8:0 [ 4.017335] device: 'sda': device_add [ 4.017417] PM: Adding info for No Bus:sda [ 4.022111] bus: 'usb': add driver hub [ 4.022473] usbcore: registered new interface driver hub [ 4.026654] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 4.030876] device: 'sda1': device_add [ 4.030978] PM: Adding info for No Bus:sda1 [ 4.031098] device: 'sda2': device_add [ 4.031182] PM: Adding info for No Bus:sda2 [ 4.031242] device: 'sda3': device_add [ 4.031319] PM: Adding info for No Bus:sda3 [ 4.031375] device: 'sda4': device_add [ 4.031446] PM: Adding info for No Bus:sda4 [ 4.031500] device: 'sda5': device_add [ 4.031580] PM: Adding info for No Bus:sda5 [ 4.031650] device: 'sda6': device_add [ 4.031728] PM: Adding info for No Bus:sda6 [ 4.031777] device: 'sda7': device_add [ 4.031853] PM: Adding info for No Bus:sda7 [ 4.031897] device: 'sda8': device_add [ 4.031979] PM: Adding info for No Bus:sda8 [ 4.032623] bus: 'firewire': registered [ 4.034423] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.042031] bus: 'pci': add driver firewire_ohci [ 4.042275] device: 'eth0': device_add [ 4.042482] PM: Adding info for No Bus:eth0 [ 4.042861] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:09:e1:34 [ 4.051146] driver: 'gem': driver_bound: bound to device '0002:20:0f.0' [ 4.051207] bus: 'usb': add driver usb [ 4.051290] usbcore: registered new device driver usb [ 4.065118] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.079693] device: '11:0': device_add [ 4.079778] PM: Adding info for No Bus:11:0 [ 4.079877] device: 'sr0': device_add [ 4.079972] PM: Adding info for No Bus:sr0 [ 4.080306] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 4.080312] driver: 'sr': driver_bound: bound to device '0:0:1:0' [ 4.080628] bus: 'scsi': really_probe: bound device 0:0:1:0 to driver sr [ 4.084674] bus: 'pci': really_probe: bound device 0002:20:0f.0 to driver gem [ 4.084700] bus: 'pci': driver_probe_device: matched device 0002:20:0e.0 with driver firewire_ohci [ 4.084706] bus: 'pci': really_probe: probing driver firewire_ohci with device 0002:20:0e.0 [ 4.084743] devices_kset: Moving 0002:20:0e.0 to end of list [ 4.084775] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 4.091226] bus: 'platform': add driver ppc-of-ehci [ 4.093781] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.105180] ehci-pci: EHCI PCI platform driver [ 4.109554] bus: 'pci': add driver ehci-pci [ 4.120858] bus: 'platform': add driver ppc-of-ohci [ 4.127530] bus: 'pci': driver_probe_device: matched device 0001:10:1b.2 with driver ehci-pci [ 4.127541] bus: 'pci': really_probe: probing driver ehci-pci with device 0001:10:1b.2 [ 4.127557] devices_kset: Moving 0001:10:1b.2 to end of list [ 4.127640] ehci-pci 0001:10:1b.2: EHCI Host Controller [ 4.150656] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 4.170035] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 4.178642] driver: 'firewire_ohci': driver_bound: bound to device '0002:20:0e.0' [ 4.203583] bus: 'pci': really_probe: bound device 0002:20:0e.0 to driver firewire_ohci [ 4.205601] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000 [ 4.238099] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 4.249338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.253694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.262233] usb usb1: Product: EHCI Host Controller [ 4.266493] usb usb1: Manufacturer: Linux 4.15.0+ ehci_hcd [ 4.270691] usb usb1: SerialNumber: 0001:10:1b.2 [ 4.278588] device: 'usb1': device_add [ 4.278752] bus: 'usb': add device usb1 [ 4.278810] PM: Adding info for usb:usb1 [ 4.279405] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 4.279412] bus: 'usb': really_probe: probing driver usb with device usb1 [ 4.279437] devices_kset: Moving usb1 to end of list [ 4.279503] device: '1-0:1.0': device_add [ 4.279566] bus: 'usb': add device 1-0:1.0 [ 4.279597] PM: Adding info for usb:1-0:1.0 [ 4.279962] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 4.279966] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 4.279982] devices_kset: Moving 1-0:1.0 to end of list [ 4.279993] hub 1-0:1.0: USB hub found [ 4.284101] hub 1-0:1.0: 5 ports detected [ 4.288173] device: 'usb1-port1': device_add [ 4.288225] PM: Adding info for No Bus:usb1-port1 [ 4.288253] device: 'usb1-port2': device_add [ 4.288300] PM: Adding info for No Bus:usb1-port2 [ 4.288319] device: 'usb1-port3': device_add [ 4.288358] PM: Adding info for No Bus:usb1-port3 [ 4.288378] device: 'usb1-port4': device_add [ 4.288416] PM: Adding info for No Bus:usb1-port4 [ 4.288458] device: 'usb1-port5': device_add [ 4.288508] PM: Adding info for No Bus:usb1-port5 [ 4.295118] driver: 'hub': driver_bound: bound to device '1-0:1.0' [ 4.295231] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 4.295712] device: 'ep_81': device_add [ 4.295804] PM: Adding info for No Bus:ep_81 [ 4.295812] driver: 'usb': driver_bound: bound to device 'usb1' [ 4.295881] bus: 'usb': really_probe: bound device usb1 to driver usb [ 4.296239] device: 'ep_00': device_add [ 4.296322] PM: Adding info for No Bus:ep_00 [ 4.296372] driver: 'ehci-pci': driver_bound: bound to device '0001:10:1b.2' [ 4.296428] bus: 'pci': really_probe: bound device 0001:10:1b.2 to driver ehci-pci [ 4.298395] ohci-pci: OHCI PCI platform driver [ 4.302375] bus: 'pci': add driver ohci-pci [ 4.310193] bus: 'pci': driver_probe_device: matched device 0001:10:18.0 with driver ohci-pci [ 4.310205] bus: 'pci': really_probe: probing driver ohci-pci with device 0001:10:18.0 [ 4.310220] devices_kset: Moving 0001:10:18.0 to end of list [ 4.310230] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 4.319305] ohci-pci: probe of 0001:10:18.0 rejects match -19 [ 4.319319] bus: 'pci': driver_probe_device: matched device 0001:10:19.0 with driver ohci-pci [ 4.319325] bus: 'pci': really_probe: probing driver ohci-pci with device 0001:10:19.0 [ 4.319345] devices_kset: Moving 0001:10:19.0 to end of list [ 4.319353] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 4.323257] ohci-pci: probe of 0001:10:19.0 rejects match -19 [ 4.323263] bus: 'pci': driver_probe_device: matched device 0001:10:1a.0 with driver ohci-pci [ 4.323266] bus: 'pci': really_probe: probing driver ohci-pci with device 0001:10:1a.0 [ 4.323278] devices_kset: Moving 0001:10:1a.0 to end of list [ 4.323351] ohci-pci 0001:10:1a.0: OHCI PCI host controller [ 4.327506] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 4.335247] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000 [ 4.419691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.423612] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.431051] usb usb2: Product: OHCI PCI host controller [ 4.434803] usb usb2: Manufacturer: Linux 4.15.0+ ohci_hcd [ 4.438506] usb usb2: SerialNumber: 0001:10:1a.0 [ 4.442243] device: 'usb2': device_add [ 4.442417] bus: 'usb': add device usb2 [ 4.442487] PM: Adding info for usb:usb2 [ 4.443559] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 4.443566] bus: 'usb': really_probe: probing driver usb with device usb2 [ 4.443596] devices_kset: Moving usb2 to end of list [ 4.443661] device: '2-0:1.0': device_add [ 4.443717] bus: 'usb': add device 2-0:1.0 [ 4.443743] PM: Adding info for usb:2-0:1.0 [ 4.444263] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 4.444268] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 4.444296] devices_kset: Moving 2-0:1.0 to end of list [ 4.444308] hub 2-0:1.0: USB hub found [ 4.447953] hub 2-0:1.0: 2 ports detected [ 4.451540] device: 'usb2-port1': device_add [ 4.451591] PM: Adding info for No Bus:usb2-port1 [ 4.451615] device: 'usb2-port2': device_add [ 4.451654] PM: Adding info for No Bus:usb2-port2 [ 4.451716] driver: 'hub': driver_bound: bound to device '2-0:1.0' [ 4.451779] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub [ 4.452132] device: 'ep_81': device_add [ 4.452216] PM: Adding info for No Bus:ep_81 [ 4.452223] driver: 'usb': driver_bound: bound to device 'usb2' [ 4.452278] bus: 'usb': really_probe: bound device usb2 to driver usb [ 4.452603] device: 'ep_00': device_add [ 4.452682] PM: Adding info for No Bus:ep_00 [ 4.452719] driver: 'ohci-pci': driver_bound: bound to device '0001:10:1a.0' [ 4.452769] bus: 'pci': really_probe: bound device 0001:10:1a.0 to driver ohci-pci [ 4.453048] bus: 'pci': driver_probe_device: matched device 0001:10:1b.0 with driver ohci-pci [ 4.453054] bus: 'pci': really_probe: probing driver ohci-pci with device 0001:10:1b.0 [ 4.453070] devices_kset: Moving 0001:10:1b.0 to end of list [ 4.453126] ohci-pci 0001:10:1b.0: OHCI PCI host controller [ 4.457018] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 4.464078] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000 [ 4.545963] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.549571] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.556639] usb usb3: Product: OHCI PCI host controller [ 4.560198] usb usb3: Manufacturer: Linux 4.15.0+ ohci_hcd [ 4.563685] usb usb3: SerialNumber: 0001:10:1b.0 [ 4.567505] device: 'usb3': device_add [ 4.567690] bus: 'usb': add device usb3 [ 4.567763] PM: Adding info for usb:usb3 [ 4.568447] bus: 'usb': driver_probe_device: matched device usb3 with driver usb [ 4.568455] bus: 'usb': really_probe: probing driver usb with device usb3 [ 4.568483] devices_kset: Moving usb3 to end of list [ 4.568540] device: '3-0:1.0': device_add [ 4.568602] bus: 'usb': add device 3-0:1.0 [ 4.568626] PM: Adding info for usb:3-0:1.0 [ 4.568980] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub [ 4.568985] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0 [ 4.569000] devices_kset: Moving 3-0:1.0 to end of list [ 4.569011] hub 3-0:1.0: USB hub found [ 4.572747] hub 3-0:1.0: 3 ports detected [ 4.576233] device: 'usb3-port1': device_add [ 4.576288] PM: Adding info for No Bus:usb3-port1 [ 4.576311] device: 'usb3-port2': device_add [ 4.576351] PM: Adding info for No Bus:usb3-port2 [ 4.576373] device: 'usb3-port3': device_add [ 4.576412] PM: Adding info for No Bus:usb3-port3 [ 4.576485] driver: 'hub': driver_bound: bound to device '3-0:1.0' [ 4.576549] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub [ 4.576903] device: 'ep_81': device_add [ 4.576987] PM: Adding info for No Bus:ep_81 [ 4.576994] driver: 'usb': driver_bound: bound to device 'usb3' [ 4.577053] bus: 'usb': really_probe: bound device usb3 to driver usb [ 4.577387] device: 'ep_00': device_add [ 4.577456] PM: Adding info for No Bus:ep_00 [ 4.577499] driver: 'ohci-pci': driver_bound: bound to device '0001:10:1b.0' [ 4.577548] bus: 'pci': really_probe: bound device 0001:10:1b.0 to driver ohci-pci [ 4.577837] bus: 'pci': driver_probe_device: matched device 0001:10:1b.1 with driver ohci-pci [ 4.577843] bus: 'pci': really_probe: probing driver ohci-pci with device 0001:10:1b.1 [ 4.577860] devices_kset: Moving 0001:10:1b.1 to end of list [ 4.577917] ohci-pci 0001:10:1b.1: OHCI PCI host controller [ 4.581547] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 4.588674] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000 [ 4.669846] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.673748] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.681192] usb usb4: Product: OHCI PCI host controller [ 4.684938] usb usb4: Manufacturer: Linux 4.15.0+ ohci_hcd [ 4.688655] usb usb4: SerialNumber: 0001:10:1b.1 [ 4.706054] device: 'fw0': device_add [ 4.706117] bus: 'firewire': add device fw0 [ 4.706163] PM: Adding info for firewire:fw0 [ 4.706295] firewire_core 0002:20:0e.0: created device fw0: GUID 001451fffe09e134, S400 [ 4.726966] device: 'usb4': device_add [ 4.727124] bus: 'usb': add device usb4 [ 4.727179] PM: Adding info for usb:usb4 [ 4.727801] bus: 'usb': driver_probe_device: matched device usb4 with driver usb [ 4.727808] bus: 'usb': really_probe: probing driver usb with device usb4 [ 4.727836] devices_kset: Moving usb4 to end of list [ 4.727903] device: '4-0:1.0': device_add [ 4.727970] bus: 'usb': add device 4-0:1.0 [ 4.727995] PM: Adding info for usb:4-0:1.0 [ 4.728360] bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub [ 4.728365] bus: 'usb': really_probe: probing driver hub with device 4-0:1.0 [ 4.728382] devices_kset: Moving 4-0:1.0 to end of list [ 4.728395] hub 4-0:1.0: USB hub found [ 4.732198] hub 4-0:1.0: 2 ports detected [ 4.736121] device: 'usb4-port1': device_add [ 4.736180] PM: Adding info for No Bus:usb4-port1 [ 4.736202] device: 'usb4-port2': device_add [ 4.736413] PM: Adding info for No Bus:usb4-port2 [ 4.736478] driver: 'hub': driver_bound: bound to device '4-0:1.0' [ 4.736549] bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub [ 4.736935] device: 'ep_81': device_add [ 4.737024] PM: Adding info for No Bus:ep_81 [ 4.737030] driver: 'usb': driver_bound: bound to device 'usb4' [ 4.737085] bus: 'usb': really_probe: bound device usb4 to driver usb [ 4.737430] device: 'ep_00': device_add [ 4.737500] PM: Adding info for No Bus:ep_00 [ 4.737547] driver: 'ohci-pci': driver_bound: bound to device '0001:10:1b.1' [ 4.737596] bus: 'pci': really_probe: bound device 0001:10:1b.1 to driver ohci-pci [ 4.857970] usb 2-1: new full-speed USB device number 2 using ohci-pci [ 5.105165] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000 [ 5.108998] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.113325] device: '2-1': device_add [ 5.113485] bus: 'usb': add device 2-1 [ 5.113543] PM: Adding info for usb:2-1 [ 5.114273] bus: 'usb': driver_probe_device: matched device 2-1 with driver usb [ 5.114281] bus: 'usb': really_probe: probing driver usb with device 2-1 [ 5.114313] devices_kset: Moving 2-1 to end of list [ 5.117086] device: '2-1:1.0': device_add [ 5.117144] bus: 'usb': add device 2-1:1.0 [ 5.117180] PM: Adding info for usb:2-1:1.0 [ 5.117539] device: 'ep_81': device_add [ 5.117617] PM: Adding info for No Bus:ep_81 [ 5.117623] device: '2-1:1.1': device_add [ 5.117669] bus: 'usb': add device 2-1:1.1 [ 5.117698] PM: Adding info for usb:2-1:1.1 [ 5.118069] device: 'ep_82': device_add [ 5.118141] PM: Adding info for No Bus:ep_82 [ 5.118147] driver: 'usb': driver_bound: bound to device '2-1' [ 5.118198] bus: 'usb': really_probe: bound device 2-1 to driver usb [ 5.118510] device: 'ep_00': device_add [ 5.118598] PM: Adding info for No Bus:ep_00 [ 5.130128] bus: 'usb': add driver usbhid [ 5.130166] bus: 'usb': driver_probe_device: matched device 2-1:1.0 with driver usbhid [ 5.130174] bus: 'usb': really_probe: probing driver usbhid with device 2-1:1.0 [ 5.130203] devices_kset: Moving 2-1:1.0 to end of list [ 5.149400] device: '0003:05AC:1000.0001': device_add [ 5.149436] bus: 'hid': add device 0003:05AC:1000.0001 [ 5.149486] PM: Adding info for hid:0003:05AC:1000.0001 [ 5.149920] bus: 'hid': driver_probe_device: matched device 0003:05AC:1000.0001 with driver hid-generic [ 5.149972] bus: 'hid': really_probe: probing driver hid-generic with device 0003:05AC:1000.0001 [ 5.149994] devices_kset: Moving 0003:05AC:1000.0001 to end of list [ 5.150449] device: 'input1': device_add [ 5.150567] PM: Adding info for No Bus:input1 [ 5.150971] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0001/input/input1 [ 5.217990] device: 'input1::numlock': device_add [ 5.218070] PM: Adding info for No Bus:input1::numlock [ 5.218351] device: 'input1::capslock': device_add [ 5.218429] PM: Adding info for No Bus:input1::capslock [ 5.218605] device: 'input1::scrolllock': device_add [ 5.218657] PM: Adding info for No Bus:input1::scrolllock [ 5.218804] device: 'input1::compose': device_add [ 5.218855] PM: Adding info for No Bus:input1::compose [ 5.218989] device: 'input1::kana': device_add [ 5.219049] PM: Adding info for No Bus:input1::kana [ 5.219195] device: 'hidraw0': device_add [ 5.219252] PM: Adding info for No Bus:hidraw0 [ 5.219550] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 [ 5.227515] driver: 'hid-generic': driver_bound: bound to device '0003:05AC:1000.0001' [ 5.227581] bus: 'hid': really_probe: bound device 0003:05AC:1000.0001 to driver hid-generic [ 5.227801] driver: 'usbhid': driver_bound: bound to device '2-1:1.0' [ 5.227858] bus: 'usb': really_probe: bound device 2-1:1.0 to driver usbhid [ 5.228113] bus: 'usb': driver_probe_device: matched device 2-1:1.1 with driver usbhid [ 5.228120] bus: 'usb': really_probe: probing driver usbhid with device 2-1:1.1 [ 5.228145] devices_kset: Moving 2-1:1.1 to end of list [ 5.246294] device: '0003:05AC:1000.0002': device_add [ 5.246330] bus: 'hid': add device 0003:05AC:1000.0002 [ 5.246388] PM: Adding info for hid:0003:05AC:1000.0002 [ 5.246826] bus: 'hid': driver_probe_device: matched device 0003:05AC:1000.0002 with driver hid-generic [ 5.246835] bus: 'hid': really_probe: probing driver hid-generic with device 0003:05AC:1000.0002 [ 5.246855] devices_kset: Moving 0003:05AC:1000.0002 to end of list [ 5.247272] device: 'input2': device_add [ 5.247399] PM: Adding info for No Bus:input2 [ 5.247790] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0002/input/input2 [ 5.258755] device: 'mouse0': device_add [ 5.260579] PM: Adding info for No Bus:mouse0 [ 5.261111] device: 'hidraw1': device_add [ 5.261178] PM: Adding info for No Bus:hidraw1 [ 5.261460] hid-generic 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 [ 5.269798] driver: 'hid-generic': driver_bound: bound to device '0003:05AC:1000.0002' [ 5.269863] bus: 'hid': really_probe: bound device 0003:05AC:1000.0002 to driver hid-generic [ 5.270094] driver: 'usbhid': driver_bound: bound to device '2-1:1.1' [ 5.270153] bus: 'usb': really_probe: bound device 2-1:1.1 to driver usbhid [ 5.273284] usbcore: registered new interface driver usbhid [ 5.277732] usbhid: USB HID core driver [ 5.374039] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 5.388490] PM: Starting manual resume from disk [ 5.393390] PM: Image not found (code -22) [ 5.618267] usb 4-1: New USB device found, idVendor=05ac, idProduct=1003 [ 5.622797] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.627340] usb 4-1: Product: Hub in Apple Extended USB Keyboard [ 5.631871] usb 4-1: Manufacturer: Mitsumi Electric [ 5.641322] device: '4-1': device_add [ 5.641489] bus: 'usb': add device 4-1 [ 5.641527] PM: Adding info for usb:4-1 [ 5.646504] bus: 'usb': driver_probe_device: matched device 4-1 with driver usb [ 5.646515] bus: 'usb': really_probe: probing driver usb with device 4-1 [ 5.646554] devices_kset: Moving 4-1 to end of list [ 5.648230] device: '4-1:1.0': device_add [ 5.648293] bus: 'usb': add device 4-1:1.0 [ 5.648320] PM: Adding info for usb:4-1:1.0 [ 5.648400] bus: 'usb': driver_probe_device: matched device 4-1:1.0 with driver hub [ 5.648405] bus: 'usb': really_probe: probing driver hub with device 4-1:1.0 [ 5.648422] devices_kset: Moving 4-1:1.0 to end of list [ 5.648434] hub 4-1:1.0: USB hub found [ 5.655165] hub 4-1:1.0: 3 ports detected [ 5.670169] device: '4-1-port1': device_add [ 5.670247] PM: Adding info for No Bus:4-1-port1 [ 5.670287] device: '4-1-port2': device_add [ 5.670322] PM: Adding info for No Bus:4-1-port2 [ 5.670344] device: '4-1-port3': device_add [ 5.670377] PM: Adding info for No Bus:4-1-port3 [ 5.678089] driver: 'hub': driver_bound: bound to device '4-1:1.0' [ 5.678185] bus: 'usb': really_probe: bound device 4-1:1.0 to driver hub [ 5.678213] device: 'ep_81': device_add [ 5.678315] PM: Adding info for No Bus:ep_81 [ 5.678322] driver: 'usb': driver_bound: bound to device '4-1' [ 5.678361] bus: 'usb': really_probe: bound device 4-1 to driver usb [ 5.678395] device: 'ep_00': device_add [ 5.678469] PM: Adding info for No Bus:ep_00 [ 5.688105] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 5.981957] usb 4-1.3: new full-speed USB device number 3 using ohci-pci [ 6.118777] usb 4-1.3: New USB device found, idVendor=05ac, idProduct=020c [ 6.122981] usb 4-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 6.130915] usb 4-1.3: Product: Apple Extended USB Keyboard [ 6.134883] usb 4-1.3: Manufacturer: Mitsumi Electric [ 6.138984] device: '4-1.3': device_add [ 6.139151] bus: 'usb': add device 4-1.3 [ 6.139193] PM: Adding info for usb:4-1.3 [ 6.139373] bus: 'usb': driver_probe_device: matched device 4-1.3 with driver usb [ 6.139380] bus: 'usb': really_probe: probing driver usb with device 4-1.3 [ 6.139400] devices_kset: Moving 4-1.3 to end of list [ 6.140755] device: '4-1.3:1.0': device_add [ 6.140818] bus: 'usb': add device 4-1.3:1.0 [ 6.140850] PM: Adding info for usb:4-1.3:1.0 [ 6.140895] bus: 'usb': driver_probe_device: matched device 4-1.3:1.0 with driver usbhid [ 6.140899] bus: 'usb': really_probe: probing driver usbhid with device 4-1.3:1.0 [ 6.140915] devices_kset: Moving 4-1.3:1.0 to end of list [ 6.149830] device: '0003:05AC:020C.0003': device_add [ 6.149858] bus: 'hid': add device 0003:05AC:020C.0003 [ 6.149907] PM: Adding info for hid:0003:05AC:020C.0003 [ 6.149979] bus: 'hid': driver_probe_device: matched device 0003:05AC:020C.0003 with driver hid-generic [ 6.149985] bus: 'hid': really_probe: probing driver hid-generic with device 0003:05AC:020C.0003 [ 6.150000] devices_kset: Moving 0003:05AC:020C.0003 to end of list [ 6.150449] device: 'input3': device_add [ 6.150560] PM: Adding info for No Bus:input3 [ 6.150622] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1.3/4-1.3:1.0/0003:05AC:020C.0003/input/input3 [ 6.217999] device: 'input3::numlock': device_add [ 6.218088] PM: Adding info for No Bus:input3::numlock [ 6.218138] device: 'input3::capslock': device_add [ 6.218217] PM: Adding info for No Bus:input3::capslock [ 6.218245] device: 'input3::scrolllock': device_add [ 6.218293] PM: Adding info for No Bus:input3::scrolllock [ 6.218316] device: 'input3::compose': device_add [ 6.218371] PM: Adding info for No Bus:input3::compose [ 6.218391] device: 'input3::kana': device_add [ 6.218442] PM: Adding info for No Bus:input3::kana [ 6.218474] device: 'hidraw2': device_add [ 6.218530] PM: Adding info for No Bus:hidraw2 [ 6.218645] hid-generic 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.1-1.3/input0 [ 6.231333] driver: 'hid-generic': driver_bound: bound to device '0003:05AC:020C.0003' [ 6.231373] bus: 'hid': really_probe: bound device 0003:05AC:020C.0003 to driver hid-generic [ 6.231386] driver: 'usbhid': driver_bound: bound to device '4-1.3:1.0' [ 6.231417] bus: 'usb': really_probe: bound device 4-1.3:1.0 to driver usbhid [ 6.231434] device: 'ep_81': device_add [ 6.231585] PM: Adding info for No Bus:ep_81 [ 6.231592] device: '4-1.3:1.1': device_add [ 6.231645] bus: 'usb': add device 4-1.3:1.1 [ 6.231680] PM: Adding info for usb:4-1.3:1.1 [ 6.231716] bus: 'usb': driver_probe_device: matched device 4-1.3:1.1 with driver usbhid [ 6.231720] bus: 'usb': really_probe: probing driver usbhid with device 4-1.3:1.1 [ 6.231740] devices_kset: Moving 4-1.3:1.1 to end of list [ 6.238998] device: '0003:05AC:020C.0004': device_add [ 6.239023] bus: 'hid': add device 0003:05AC:020C.0004 [ 6.239071] PM: Adding info for hid:0003:05AC:020C.0004 [ 6.239103] bus: 'hid': driver_probe_device: matched device 0003:05AC:020C.0004 with driver hid-generic [ 6.239108] bus: 'hid': really_probe: probing driver hid-generic with device 0003:05AC:020C.0004 [ 6.239121] devices_kset: Moving 0003:05AC:020C.0004 to end of list [ 6.240137] device: 'input4': device_add [ 6.240263] PM: Adding info for No Bus:input4 [ 6.240311] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1.3/4-1.3:1.1/0003:05AC:020C.0004/input/input4 [ 6.305980] device: 'hidraw3': device_add [ 6.306049] PM: Adding info for No Bus:hidraw3 [ 6.306162] hid-generic 0003:05AC:020C.0004: input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.1-1.3/input1 [ 6.319415] driver: 'hid-generic': driver_bound: bound to device '0003:05AC:020C.0004' [ 6.319704] bus: 'hid': really_probe: bound device 0003:05AC:020C.0004 to driver hid-generic [ 6.319717] driver: 'usbhid': driver_bound: bound to device '4-1.3:1.1' [ 6.319747] bus: 'usb': really_probe: bound device 4-1.3:1.1 to driver usbhid [ 6.319761] device: 'ep_82': device_add [ 6.319845] PM: Adding info for No Bus:ep_82 [ 6.319851] driver: 'usb': driver_bound: bound to device '4-1.3' [ 6.319876] bus: 'usb': really_probe: bound device 4-1.3 to driver usb [ 6.319906] device: 'ep_00': device_add [ 6.319970] PM: Adding info for No Bus:ep_00 [ 7.045486] device: 'autofs': device_add [ 7.045541] PM: Adding info for No Bus:autofs [ 7.126178] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 7.140345] systemd[1]: Detected architecture ppc. [ 7.157878] random: crng init done [ 7.198400] systemd[1]: Set hostname to . [ 8.522379] systemd[1]: System is tainted: var-run-bad [ 8.528224] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.542498] systemd[1]: Reached target Remote File Systems. [ 8.552953] systemd[1]: Created slice System Slice. [ 8.562928] systemd[1]: Listening on udev Control Socket. [ 8.572814] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.590596] systemd[1]: Mounting Kernel Debug File System... [ 8.915193] bus: 'usb': add driver usb-storage [ 8.915399] usbcore: registered new interface driver usb-storage [ 9.150406] device: 'vcs2': device_add [ 9.150475] PM: Adding info for No Bus:vcs2 [ 9.150651] device: 'vcsa2': device_add [ 9.150695] PM: Adding info for No Bus:vcsa2 [ 9.182997] device: 'vcs3': device_add [ 9.183077] PM: Adding info for No Bus:vcs3 [ 9.183255] device: 'vcsa3': device_add [ 9.183314] PM: Adding info for No Bus:vcsa3 [ 9.190236] device: 'vcs4': device_add [ 9.190309] PM: Adding info for No Bus:vcs4 [ 9.190731] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.197386] device: 'vcsa4': device_add [ 9.197458] PM: Adding info for No Bus:vcsa4 [ 9.242676] device: 'vcs5': device_add [ 9.242756] PM: Adding info for No Bus:vcs5 [ 9.242895] device: 'vcsa5': device_add [ 9.242942] PM: Adding info for No Bus:vcsa5 [ 9.258050] device: 'vcs6': device_add [ 9.258121] PM: Adding info for No Bus:vcs6 [ 9.258259] device: 'vcsa6': device_add [ 9.258308] PM: Adding info for No Bus:vcsa6 [ 10.061820] bus: 'ssb': registered [ 10.061832] bus: 'pci': add driver b43-pci-bridge [ 10.061856] bus: 'pci': driver_probe_device: matched device 0001:10:12.0 with driver b43-pci-bridge [ 10.061864] bus: 'pci': really_probe: probing driver b43-pci-bridge with device 0001:10:12.0 [ 10.061883] devices_kset: Moving 0001:10:12.0 to end of list [ 10.061910] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 10.073995] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00 [ 10.077751] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243) [ 10.077756] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243) [ 10.077761] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243) [ 10.077765] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) [ 10.077770] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) [ 10.092984] device: 'ssb0:0': device_add [ 10.093034] bus: 'ssb': add device ssb0:0 [ 10.093108] PM: Adding info for ssb:ssb0:0 [ 10.093172] device: 'ssb0:1': device_add [ 10.093185] bus: 'ssb': add device ssb0:1 [ 10.093254] PM: Adding info for ssb:ssb0:1 [ 10.093279] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 10.097172] driver: 'b43-pci-bridge': driver_bound: bound to device '0001:10:12.0' [ 10.106070] bus: 'pci': really_probe: bound device 0001:10:12.0 to driver b43-pci-bridge [ 10.188489] device class 'sound': registering [ 10.227252] device: 'timer': device_add [ 10.227336] PM: Adding info for No Bus:timer [ 10.279652] device: 'event0': device_add [ 10.279711] PM: Adding info for No Bus:event0 [ 10.280316] device: 'event1': device_add [ 10.280370] PM: Adding info for No Bus:event1 [ 10.280474] device: 'event2': device_add [ 10.280538] PM: Adding info for No Bus:event2 [ 10.280619] device: 'event3': device_add [ 10.280667] PM: Adding info for No Bus:event3 [ 10.280742] device: 'event4': device_add [ 10.280789] PM: Adding info for No Bus:event4 [ 10.288059] bus: 'aoa-soundbus': registered [ 10.291763] bus: 'macio': add driver soundbus-i2s [ 10.291794] bus: 'macio': driver_probe_device: matched device 0.00010000:i2s with driver soundbus-i2s [ 10.291802] bus: 'macio': really_probe: probing driver soundbus-i2s with device 0.00010000:i2s [ 10.291822] devices_kset: Moving 0.00010000:i2s to end of list [ 10.292132] device: 'soundbus:1': device_add [ 10.292148] bus: 'aoa-soundbus': add device soundbus:1 [ 10.292198] PM: Adding info for aoa-soundbus:soundbus:1 [ 10.292254] driver: 'soundbus-i2s': driver_bound: bound to device '0.00010000:i2s' [ 10.295373] bus: 'macio': really_probe: bound device 0.00010000:i2s to driver soundbus-i2s [ 10.315150] device class 'scsi_generic': registering [ 10.315234] device: 'sg0': device_add [ 10.315299] PM: Adding info for No Bus:sg0 [ 10.321172] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.342500] device: 'sg1': device_add [ 10.342585] PM: Adding info for No Bus:sg1 [ 10.354657] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 10.714812] device class 'ieee80211': registering [ 10.715191] Registering platform device 'regulatory.0'. Parent at platform [ 10.715198] device: 'regulatory.0': device_add [ 10.715214] bus: 'platform': add device regulatory.0 [ 10.715269] PM: Adding info for platform:regulatory.0 [ 10.715516] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.034210] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.038310] firmware_class: __allocate_fw_priv: fw-regulatory.db fw_priv=9910643a [ 11.053378] platform regulatory.0: loading /lib/firmware/updates/4.15.0+/regulatory.db failed with error -2 [ 11.053397] platform regulatory.0: loading /lib/firmware/updates/regulatory.db failed with error -2 [ 11.053416] platform regulatory.0: loading /lib/firmware/4.15.0+/regulatory.db failed with error -2 [ 11.053431] platform regulatory.0: loading /lib/firmware/regulatory.db failed with error -2 [ 11.053436] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.061353] firmware_class: __free_fw_priv: fw-regulatory.db fw_priv=9910643a data= (null) size=0 [ 11.061364] cfg80211: failed to load regulatory.db [ 11.404315] bus: 'aoa-soundbus': add driver snd_aoa_soundbus_drv [ 11.404341] bus: 'aoa-soundbus': driver_probe_device: matched device soundbus:1 with driver snd_aoa_soundbus_drv [ 11.404349] bus: 'aoa-soundbus': really_probe: probing driver snd_aoa_soundbus_drv with device soundbus:1 [ 11.404377] devices_kset: Moving soundbus:1 to end of list [ 11.404387] snd-aoa-fabric-layout: Using direct GPIOs [ 11.404609] device: 'card0': device_add [ 11.404684] PM: Adding info for No Bus:card0 [ 11.404727] device: 'controlC0': device_add [ 11.404781] PM: Adding info for No Bus:controlC0 [ 11.436414] snd-aoa-fabric-layout: can use this codec [ 11.444114] device: 'pcmC0D0p': device_add [ 11.444208] PM: Adding info for No Bus:pcmC0D0p [ 11.444385] device: 'pcmC0D0c': device_add [ 11.444442] PM: Adding info for No Bus:pcmC0D0c [ 11.446517] driver: 'snd_aoa_soundbus_drv': driver_bound: bound to device 'soundbus:1' [ 11.446612] bus: 'aoa-soundbus': really_probe: bound device soundbus:1 to driver snd_aoa_soundbus_drv [ 11.556217] bus: 'bcma': registered [ 11.556230] bus: 'pci': add driver bcma-pci-bridge [ 11.736109] bus: 'bcma': add driver b43 [ 11.736207] bus: 'ssb': add driver b43 [ 11.736399] bus: 'ssb': driver_probe_device: matched device ssb0:0 with driver b43 [ 11.736408] bus: 'ssb': really_probe: probing driver b43 with device ssb0:0 [ 11.736419] devices_kset: Moving ssb0:0 to end of list [ 11.736457] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 11.754006] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2 [ 11.758166] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 [ 11.790688] driver: 'b43': driver_bound: bound to device 'ssb0:0' [ 11.790751] firmware_class: __allocate_fw_priv: fw-b43/ucode5.fw fw_priv=904e81ff [ 11.790777] b43 ssb0:0: loading /lib/firmware/updates/4.15.0+/b43/ucode5.fw failed with error -2 [ 11.790785] b43 ssb0:0: loading /lib/firmware/updates/b43/ucode5.fw failed with error -2 [ 11.790792] b43 ssb0:0: loading /lib/firmware/4.15.0+/b43/ucode5.fw failed with error -2 [ 11.791080] bus: 'ssb': really_probe: bound device ssb0:0 to driver b43 [ 11.791537] Broadcom 43xx driver loaded [ Features: PN ] [ 11.828694] b43 ssb0:0: direct-loading b43/ucode5.fw [ 11.828727] firmware_class: fw_set_page_data: fw-b43/ucode5.fw fw_priv=904e81ff data=8e3913c7 size=21328 [ 11.828760] firmware_class: __allocate_fw_priv: fw-b43/pcm5.fw fw_priv=fca7270e [ 11.828782] b43 ssb0:0: loading /lib/firmware/updates/4.15.0+/b43/pcm5.fw failed with error -2 [ 11.828791] b43 ssb0:0: loading /lib/firmware/updates/b43/pcm5.fw failed with error -2 [ 11.828799] b43 ssb0:0: loading /lib/firmware/4.15.0+/b43/pcm5.fw failed with error -2 [ 11.923839] b43 ssb0:0: direct-loading b43/pcm5.fw [ 11.923871] firmware_class: fw_set_page_data: fw-b43/pcm5.fw fw_priv=fca7270e data=9f3bf05b size=1320 [ 11.923889] firmware_class: __allocate_fw_priv: fw-b43/b0g0initvals5.fw fw_priv=9e3ed9e3 [ 11.923908] b43 ssb0:0: loading /lib/firmware/updates/4.15.0+/b43/b0g0initvals5.fw failed with error -2 [ 11.923916] b43 ssb0:0: loading /lib/firmware/updates/b43/b0g0initvals5.fw failed with error -2 [ 11.923926] b43 ssb0:0: loading /lib/firmware/4.15.0+/b43/b0g0initvals5.fw failed with error -2 [ 11.931979] b43 ssb0:0: direct-loading b43/b0g0initvals5.fw [ 11.932003] firmware_class: fw_set_page_data: fw-b43/b0g0initvals5.fw fw_priv=9e3ed9e3 data=2f42b5ea size=1836 [ 11.932018] firmware_class: __allocate_fw_priv: fw-b43/b0g0bsinitvals5.fw fw_priv=cd4c731e [ 11.932033] b43 ssb0:0: loading /lib/firmware/updates/4.15.0+/b43/b0g0bsinitvals5.fw failed with error -2 [ 11.932041] b43 ssb0:0: loading /lib/firmware/updates/b43/b0g0bsinitvals5.fw failed with error -2 [ 11.932048] b43 ssb0:0: loading /lib/firmware/4.15.0+/b43/b0g0bsinitvals5.fw failed with error -2 [ 11.935130] b43 ssb0:0: direct-loading b43/b0g0bsinitvals5.fw [ 11.935149] firmware_class: fw_set_page_data: fw-b43/b0g0bsinitvals5.fw fw_priv=cd4c731e data=7c62f7f3 size=178 [ 11.935175] device: 'phy0': device_add [ 11.935292] PM: Adding info for No Bus:phy0 [ 11.987765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.987859] device: 'wlan0': device_add [ 11.988088] PM: Adding info for No Bus:wlan0 [ 13.098444] Adding 1497064k swap on /dev/sda5. Priority:-2 extents:1 across:1497064k [ 14.082501] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 14.269220] systemd-journald[152]: Received request to flush runtime journal from PID 1 [ 14.559490] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 14.713335] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 16.583897] device: 'uinput': device_add [ 16.583960] PM: Adding info for No Bus:uinput [ 16.966360] sungem_phy: PHY ID: 4061e4, addr: 0 [ 16.966692] gem 0002:20:0f.0 eth0: Found BCM5221 PHY [ 16.966983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.868804] device: 'input5': device_add [ 18.868923] PM: Adding info for No Bus:input5 [ 18.872477] input: Mouseemu virtual keyboard as /devices/virtual/input/input5 [ 18.872761] device: 'event5': device_add [ 18.872838] PM: Adding info for No Bus:event5 [ 18.874484] device: 'input6': device_add [ 18.874610] PM: Adding info for No Bus:input6 [ 18.874665] input: Mouseemu virtual mouse as /devices/virtual/input/input6 [ 18.874910] device: 'mouse1': device_add [ 18.874955] PM: Adding info for No Bus:mouse1 [ 18.878460] device: 'event6': device_add [ 18.878539] PM: Adding info for No Bus:event6 [ 19.141961] device: 'vcs7': device_add [ 19.142037] PM: Adding info for No Bus:vcs7 [ 19.147130] device: 'vcsa7': device_add [ 19.147211] PM: Adding info for No Bus:vcsa7 [ 19.170124] WARNING: CPU: 0 PID: 463 at drivers/video/fbdev/core/fbmem.c:68 get_fb_info.part.3+0x58/0x7c [ 19.170137] Modules linked in: uinput arc4 b43 bcma snd_aoa_codec_toonie snd_aoa_fabric_layout mac80211 snd_aoa sha256_generic cfg80211 sg snd_aoa_i2sbus snd_aoa_soundbus evdev snd_pcm snd_timer snd soundcore ssb usb_storage autofs4 ext4 crc16 mbcache jbd2 fscrypto usbhid ohci_pci ehci_pci ohci_hcd ehci_hcd firewire_ohci sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom sd_mod usbcore nls_base usb_common [ 19.170200] CPU: 0 PID: 463 Comm: Xorg Tainted: G W 4.15.0+ #31 [ 19.170204] NIP: c0308c20 LR: c0308bfc CTR: c0308c44 [ 19.170208] REGS: de5fbc90 TRAP: 0700 Tainted: G W (4.15.0+) [ 19.170211] MSR: 00029032 CR: 28222828 XER: 00000000 [ 19.170222] GPR00: c0308bfc de5fbd40 c0dc4600 00000000 de533960 df6a632c 00000000 c0dc4600 GPR08: df6a632c 00000002 00000000 df30bbb0 48222822 0098bff4 00991f50 80000000 GPR16: 88000228 00000008 bfa779b8 00000002 de5fbe60 80000000 ffffffea 00000041 GPR24: 00000000 dede1c10 df6a632c de533960 dede1c10 df6a6300 c07b08f4 dee02c00 [ 19.170262] NIP [c0308c20] get_fb_info.part.3+0x58/0x7c [ 19.170267] LR [c0308bfc] get_fb_info.part.3+0x34/0x7c [ 19.170270] Call Trace: [ 19.170275] [de5fbd40] [c0308bfc] get_fb_info.part.3+0x34/0x7c (unreliable) [ 19.170281] [de5fbd50] [c0308ca0] fb_open+0x5c/0x18c [ 19.170288] [de5fbd70] [c01c4b98] chrdev_open+0xb8/0x19c [ 19.170296] [de5fbda0] [c01bbe10] do_dentry_open.isra.2+0x228/0x350 [ 19.170305] [de5fbdc0] [c01cfb68] path_openat+0x474/0xfa0 [ 19.170311] [de5fbe50] [c01d15b4] do_filp_open+0xbc/0x10c [ 19.170318] [de5fbf00] [c01bd4ac] do_sys_open+0x158/0x228 [ 19.170324] [de5fbf40] [c00151bc] ret_from_syscall+0x0/0x38 [ 19.170331] --- interrupt: c01 at 0x163960 LR = 0x1638fc [ 19.170334] Instruction dump: [ 19.170339] 7fc3f378 57ff103a 48228119 3d20c07e 3929aa04 7fe9f82e 2f9f0000 419e0018 [ 19.170349] 7d20f828 31290001 7d20f92d 40a2fff4 <0fe00000> 7fc3f378 48228a11 7fe3fb78 [ 19.170360] ---[ end trace f274d0219329bb5b ]--- [ 19.170411] WARNING: CPU: 0 PID: 463 at drivers/video/fbdev/core/fbmem.c:77 put_fb_info+0x18/0x68 [ 19.170414] Modules linked in: uinput arc4 b43 bcma snd_aoa_codec_toonie snd_aoa_fabric_layout mac80211 snd_aoa sha256_generic cfg80211 sg snd_aoa_i2sbus snd_aoa_soundbus evdev snd_pcm snd_timer snd soundcore ssb usb_storage autofs4 ext4 crc16 mbcache jbd2 fscrypto usbhid ohci_pci ehci_pci ohci_hcd ehci_hcd firewire_ohci sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom sd_mod usbcore nls_base usb_common [ 19.170458] CPU: 0 PID: 463 Comm: Xorg Tainted: G W 4.15.0+ #31 [ 19.170461] NIP: c03083ec LR: c0308bb0 CTR: c0308b48 [ 19.170465] REGS: de5fbe10 TRAP: 0700 Tainted: G W (4.15.0+) [ 19.170467] MSR: 00029032 CR: 28000222 XER: 20000000 [ 19.170477] GPR00: c0308bb0 de5fbec0 c0dc4600 dee02c00 de533960 de533968 00000001 c0dc4600 GPR08: 00000000 c07b0a40 00000000 df501e10 28000228 0098bff4 00991f50 00000000 GPR16: 009921a8 00000008 bfa779b8 009921a4 00000000 0099f0c4 00000002 00000000 GPR24: b6e83b1c de533968 dede1c10 df30bbb0 df501e10 dede1c10 dee02c10 dee02c00 [ 19.170517] NIP [c03083ec] put_fb_info+0x18/0x68 [ 19.170521] LR [c0308bb0] fb_release+0x68/0x80 [ 19.170524] Call Trace: [ 19.170527] [de5fbec0] [dede1c10] 0xdede1c10 (unreliable) [ 19.170533] [de5fbed0] [c0308bb0] fb_release+0x68/0x80 [ 19.170540] [de5fbee0] [c01c1198] __fput+0xac/0x20c [ 19.170549] [de5fbf10] [c0062140] task_work_run+0xc0/0xe8 [ 19.170561] [de5fbf30] [c000a9a8] do_notify_resume+0xb4/0xb8 [ 19.170566] [de5fbf40] [c0015aec] do_user_signal+0x74/0xc4 [ 19.170571] --- interrupt: c00 at 0x1627f8 LR = 0x1627cc [ 19.170575] Instruction dump: [ 19.170578] 80010014 38210010 7c0803a6 4e800020 38600000 4e800020 7c0802a6 90010004 [ 19.170588] 60000000 9421fff0 7c0802a6 90010014 <0fe00000> 7d401828 314affff 7d40192d [ 19.170598] ---[ end trace f274d0219329bb5c ]--- [ 19.171052] WARNING: CPU: 0 PID: 463 at drivers/video/fbdev/core/fbmem.c:68 get_fb_info.part.3+0x58/0x7c [ 19.171059] Modules linked in: uinput arc4 b43 bcma snd_aoa_codec_toonie snd_aoa_fabric_layout mac80211 snd_aoa sha256_generic cfg80211 sg snd_aoa_i2sbus snd_aoa_soundbus evdev snd_pcm snd_timer snd soundcore ssb usb_storage autofs4 ext4 crc16 mbcache jbd2 fscrypto usbhid ohci_pci ehci_pci ohci_hcd ehci_hcd firewire_ohci sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom sd_mod usbcore nls_base usb_common [ 19.171106] CPU: 0 PID: 463 Comm: Xorg Tainted: G W 4.15.0+ #31 [ 19.171110] NIP: c0308c20 LR: c0308bfc CTR: c0308c44 [ 19.171113] REGS: de5fbc90 TRAP: 0700 Tainted: G W (4.15.0+) [ 19.171116] MSR: 00029032 CR: 28222848 XER: 00000000 [ 19.171126] GPR00: c0308bfc de5fbd40 c0dc4600 00000000 de533b40 00000000 00000000 00000006 GPR08: 00002000 00000002 00000000 df30bbb0 48222842 0098bff4 00991f50 80000000 GPR16: 88000248 00000001 00000000 00000002 de5fbe60 80000000 ffffffea 00000041 GPR24: 00000000 dede1c10 00000006 de533b40 dede1c10 df6a6300 c07b08f4 dee02c00 [ 19.171166] NIP [c0308c20] get_fb_info.part.3+0x58/0x7c [ 19.171171] LR [c0308bfc] get_fb_info.part.3+0x34/0x7c [ 19.171173] Call Trace: [ 19.171177] [de5fbd40] [c0308bfc] get_fb_info.part.3+0x34/0x7c (unreliable) [ 19.171184] [de5fbd50] [c0308ca0] fb_open+0x5c/0x18c [ 19.171189] [de5fbd70] [c01c4b98] chrdev_open+0xb8/0x19c [ 19.171195] [de5fbda0] [c01bbe10] do_dentry_open.isra.2+0x228/0x350 [ 19.171202] [de5fbdc0] [c01cfb68] path_openat+0x474/0xfa0 [ 19.171208] [de5fbe50] [c01d15b4] do_filp_open+0xbc/0x10c [ 19.171214] [de5fbf00] [c01bd4ac] do_sys_open+0x158/0x228 [ 19.171219] [de5fbf40] [c00151bc] ret_from_syscall+0x0/0x38 [ 19.171225] --- interrupt: c01 at 0x163960 LR = 0x1638fc [ 19.171228] Instruction dump: [ 19.171232] 7fc3f378 57ff103a 48228119 3d20c07e 3929aa04 7fe9f82e 2f9f0000 419e0018 [ 19.171242] 7d20f828 31290001 7d20f92d 40a2fff4 <0fe00000> 7fc3f378 48228a11 7fe3fb78 [ 19.171252] ---[ end trace f274d0219329bb5d ]--- [ 19.394082] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex [ 19.394201] gem 0002:20:0f.0 eth0: Pause is disabled [ 19.394234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.211761] WARNING: CPU: 0 PID: 463 at drivers/video/fbdev/core/fbmem.c:77 put_fb_info+0x18/0x68 [ 38.212054] Modules linked in: uinput arc4 b43 bcma snd_aoa_codec_toonie snd_aoa_fabric_layout mac80211 snd_aoa sha256_generic cfg80211 sg snd_aoa_i2sbus snd_aoa_soundbus evdev snd_pcm snd_timer snd soundcore ssb usb_storage autofs4 ext4 crc16 mbcache jbd2 fscrypto usbhid ohci_pci ehci_pci ohci_hcd ehci_hcd firewire_ohci sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom sd_mod usbcore nls_base usb_common [ 38.213177] CPU: 0 PID: 463 Comm: Xorg Tainted: G W 4.15.0+ #31 [ 38.213385] NIP: c03083ec LR: c0308bb0 CTR: c0308b48 [ 38.213534] REGS: de5fbdc0 TRAP: 0700 Tainted: G W (4.15.0+) [ 38.213741] MSR: 00029032 CR: 22002282 XER: 20000000 [ 38.213944] GPR00: c0308bb0 de5fbe70 c0dc4600 dee02c00 de533b40 de533b48 00000001 c0dc4600 GPR08: 00000000 c07b0a40 00000000 df501e10 22002488 0098bff4 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: c0dc4600 de533b48 dede1c10 df30bbb0 df501e10 dede1c10 dee02c10 dee02c00 [ 38.214966] NIP [c03083ec] put_fb_info+0x18/0x68 [ 38.215104] LR [c0308bb0] fb_release+0x68/0x80 [ 38.215233] Call Trace: [ 38.219947] [de5fbe70] [dede1c10] 0xdede1c10 (unreliable) [ 38.224768] [de5fbe80] [c0308bb0] fb_release+0x68/0x80 [ 38.229588] [de5fbe90] [c01c1198] __fput+0xac/0x20c [ 38.234306] [de5fbec0] [c0062140] task_work_run+0xc0/0xe8 [ 38.238948] [de5fbee0] [c0048918] do_exit+0x268/0x964 [ 38.243478] [de5fbf20] [c00490b4] do_group_exit+0x4c/0xb0 [ 38.247929] [de5fbf30] [c0049138] __wake_up_parent+0x0/0x3c [ 38.252285] [de5fbf40] [c00151bc] ret_from_syscall+0x0/0x38 [ 38.256531] --- interrupt: c01 at 0xb7794778 LR = 0xb7794748 [ 38.264634] Instruction dump: [ 38.268481] 80010014 38210010 7c0803a6 4e800020 38600000 4e800020 7c0802a6 90010004 [ 38.276153] 60000000 9421fff0 7c0802a6 90010014 <0fe00000> 7d401828 314affff 7d40192d [ 38.283954] ---[ end trace f274d0219329bb5e ]--- [ 47.978312] bus: 'i2c': registered [ 47.978336] bus: 'i2c': add driver dummy [ 48.003378] bus: 'pci': add driver radeonfb [ 48.003414] bus: 'pci': driver_probe_device: matched device 0000:00:10.0 with driver radeonfb [ 48.003422] bus: 'pci': really_probe: probing driver radeonfb with device 0000:00:10.0 [ 48.003451] devices_kset: Moving 0000:00:10.0 to end of list [ 48.003456] radeonfb_pci_register BEGIN [ 48.003475] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) [ 48.014520] checking generic (9c008000 5a000) vs hw (98000000 8000000) [ 48.014527] fb: switching to radeonfb from OFfb ATY,RockHo [ 48.019954] Console: switching to colour dummy device 80x25 [ 48.019995] device: 'fb0': device_unregister [ 48.020146] PM: Removing info for No Bus:fb0 [ 48.025181] device: 'fb0': device_create_release [ 48.025313] WARNING: CPU: 0 PID: 578 at drivers/video/fbdev/core/fbmem.c:77 put_fb_info+0x18/0x68 [ 48.025345] Modules linked in: radeonfb(+) i2c_algo_bit fb_ddc i2c_core uinput arc4 b43 bcma snd_aoa_codec_toonie snd_aoa_fabric_layout mac80211 snd_aoa sha256_generic cfg80211 sg snd_aoa_i2sbus snd_aoa_soundbus evdev snd_pcm snd_timer snd soundcore ssb usb_storage autofs4 ext4 crc16 mbcache jbd2 fscrypto usbhid ohci_pci ehci_pci ohci_hcd ehci_hcd firewire_ohci sungem sungem_phy firewire_core crc_itu_t sr_mod cdrom sd_mod usbcore nls_base usb_common [ 48.025455] CPU: 0 PID: 578 Comm: modprobe Tainted: G W 4.15.0+ #31 [ 48.025469] NIP: c03083ec LR: c0308534 CTR: 00000000 [ 48.025480] REGS: defebb10 TRAP: 0700 Tainted: G W (4.15.0+) [ 48.025489] MSR: 00029032 CR: 22228822 XER: 20000000 [ 48.025507] GPR00: c0308534 defebbc0 c0dee040 dee02c00 00000000 00000649 00000002 c0dee040 GPR08: 00001032 c0782aac 00000000 c07819d0 22228824 009d7e6c c068c808 e258eb5c GPR16: e2579670 0000fff1 defebe54 00000001 de3136ac e25898a0 00000000 000a0000 GPR24: c0660a9c c0660a68 dee02c10 00000000 defebbd8 00000000 c07daa04 dee02c00 [ 48.025592] NIP [c03083ec] put_fb_info+0x18/0x68 [ 48.025604] LR [c0308534] do_unregister_framebuffer+0xf8/0x148 [ 48.025613] Call Trace: [ 48.025622] [defebbd0] [c0308534] do_unregister_framebuffer+0xf8/0x148 [ 48.025635] [defebc00] [c030871c] do_remove_conflicting_framebuffers+0x198/0x1b8 [ 48.025651] [defebc50] [c0308784] remove_conflicting_framebuffers+0x48/0x6c [ 48.025697] [defebc70] [e257c280] radeonfb_pci_register+0x190/0x145c [radeonfb] [ 48.025718] [defebcb0] [c02ef48c] pci_device_probe+0xdc/0x184 [ 48.025733] [defebce0] [c0368208] driver_probe_device+0x388/0x4a8 [ 48.025745] [defebd10] [c0368460] __driver_attach+0x138/0x13c [ 48.025757] [defebd30] [c0365658] bus_for_each_dev+0x70/0xc0 [ 48.025768] [defebd60] [c0366f8c] bus_add_driver+0x194/0x2a8 [ 48.025781] [defebd80] [c0369200] driver_register+0x94/0x13c [ 48.025796] [defebd90] [c0004ae4] do_one_initcall+0x4c/0x178 [ 48.025814] [defebdf0] [c00c2b5c] do_init_module+0x70/0x1ec [ 48.025826] [defebe10] [c00c1f7c] load_module+0x11a4/0x12f8 [ 48.025838] [defebec0] [c00c2338] SyS_finit_module+0xec/0x128 [ 48.025850] [defebf40] [c00151bc] ret_from_syscall+0x0/0x38 [ 48.025862] --- interrupt: c01 at 0x888410 LR = 0x9b1108 [ 48.025875] Instruction dump: [ 48.025884] 80010014 38210010 7c0803a6 4e800020 38600000 4e800020 7c0802a6 90010004 [ 48.025905] 60000000 9421fff0 7c0802a6 90010014 <0fe00000> 7d401828 314affff 7d40192d [ 48.025925] ---[ end trace f274d0219329bb5f ]--- [ 48.025983] MM calling offb_destroy [ 48.026011] device: 'vtcon1': device_unregister [ 48.026066] PM: Removing info for No Bus:vtcon1 [ 48.026129] device: 'vtcon1': device_create_release [ 48.230294] aper_base: 98000000 MC_FB_LOC to: 9bff9800, MC_AGP_LOC to: ffffa000 [ 48.230304] radeonfb (0000:00:10.0): Found 32768k of DDR 64 bits wide videoram [ 48.236555] radeonfb (0000:00:10.0): mapped 16384k videoram [ 48.236651] radeonfb 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000 [ 48.236691] radeonfb (0000:00:10.0): ROM failed to map [ 48.236707] radeonfb: Retrieved PLL infos from Open Firmware [ 48.236718] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz [ 48.236732] radeonfb: PLL min 12000 max 35000 [ 48.236801] device: 'i2c-0': device_add [ 48.236850] bus: 'i2c': add device i2c-0 [ 48.236913] PM: Adding info for i2c:i2c-0 [ 48.244416] radeonfb 0000:00:10.0: I2C bus monid registered. [ 48.244483] device: 'i2c-1': device_add [ 48.244514] bus: 'i2c': add device i2c-1 [ 48.244553] PM: Adding info for i2c:i2c-1 [ 48.244639] radeonfb 0000:00:10.0: I2C bus dvi registered. [ 48.244683] device: 'i2c-2': device_add [ 48.244705] bus: 'i2c': add device i2c-2 [ 48.244752] PM: Adding info for i2c:i2c-2 [ 48.244793] radeonfb 0000:00:10.0: I2C bus vga registered. [ 48.244835] device: 'i2c-3': device_add [ 48.244856] bus: 'i2c': add device i2c-3 [ 48.244891] PM: Adding info for i2c:i2c-3 [ 48.244926] radeonfb 0000:00:10.0: I2C bus crt2 registered. [ 48.244941] Starting monitor auto detection... [ 48.284312] i2c /dev entries driver [ 48.284360] device class 'i2c-dev': registering [ 48.287018] device: 'i2c-0': device_add [ 48.287106] PM: Adding info for No Bus:i2c-0 [ 48.287267] device: 'i2c-1': device_add [ 48.287346] PM: Adding info for No Bus:i2c-1 [ 48.288078] device: 'i2c-2': device_add [ 48.288151] PM: Adding info for No Bus:i2c-2 [ 48.288532] device: 'i2c-3': device_add [ 48.288604] PM: Adding info for No Bus:i2c-3 [ 48.613942] radeonfb: I2C (port 1) ... not found [ 48.730984] i2c i2c-1: unable to read EDID block. [ 48.914978] i2c i2c-1: unable to read EDID block. [ 49.098979] i2c i2c-1: unable to read EDID block. [ 49.165938] radeonfb: I2C (port 2) ... not found [ 49.282978] i2c i2c-2: unable to read EDID block. [ 49.466981] i2c i2c-2: unable to read EDID block. [ 49.650983] i2c i2c-2: unable to read EDID block. [ 49.717939] radeonfb: I2C (port 3) ... not found [ 49.834989] i2c i2c-3: unable to read EDID block. [ 50.018995] i2c i2c-3: unable to read EDID block. [ 50.202989] i2c i2c-3: unable to read EDID block. [ 50.269939] radeonfb: I2C (port 4) ... not found [ 50.269944] radeon_probe_OF_head [ 50.269951] head: ATY,RockHopper2_A (letter: A, head_no: 0) [ 50.269953] analyzing OF properties... [ 50.269955] display-type: CRT [ 50.269963] radeon_probe_OF_head [ 50.269966] head: ATY,RockHopper2_A (letter: A, head_no: 1) [ 50.386978] i2c i2c-2: unable to read EDID block. [ 50.570978] i2c i2c-2: unable to read EDID block. [ 50.754982] i2c i2c-2: unable to read EDID block. [ 50.821939] radeonfb: I2C (port 3) ... not found [ 50.938989] i2c i2c-3: unable to read EDID block. [ 51.122992] i2c i2c-3: unable to read EDID block. [ 51.306993] i2c i2c-3: unable to read EDID block. [ 51.373940] radeonfb: I2C (port 4) ... not found [ 51.374935] radeonfb: Monitor 1 type CRT found [ 51.374955] radeonfb: Monitor 2 type no found [ 51.375005] device: 'fb0': device_add [ 51.375087] PM: Adding info for No Bus:fb0 [ 51.382309] device: 'vtcon1': device_add [ 51.382384] PM: Adding info for No Bus:vtcon1 [ 51.382587] hStart = 664, hEnd = 760, hTotal = 800 [ 51.382590] vStart = 491, vEnd = 493, vTotal = 525 [ 51.382593] h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2 [ 51.382595] v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea [ 51.382597] pixclock = 39721 [ 51.382598] freq = 2517 [ 51.382602] freq = 2517, PLL min = 12000, PLL max = 35000 [ 51.382605] ref_div = 12, ref_clk = 2700, output_freq = 20136 [ 51.382606] ref_div = 12, ref_clk = 2700, output_freq = 20136 [ 51.382608] post div = 0x3 [ 51.382609] fb_div = 0x59 [ 51.382611] ppll_div_3 = 0x30059 [ 51.398188] Console: switching to colour frame buffer device 80x30 [ 51.400342] radeonfb (0000:00:10.0): ATI Radeon 5962 "Yb" [ 51.400411] radeonfb_pci_register END [ 51.400416] driver: 'radeonfb': driver_bound: bound to device '0000:00:10.0' [ 51.400544] bus: 'pci': really_probe: bound device 0000:00:10.0 to driver radeonfb